3. The Jogging Kit
The assembled jogging stroller (base + jogging kit) – example Cougar1
3.1 Fitting the Jogging Kit
Hold the wheel arm with the bar cur- ving towards the centre of the trans- porter and the wheel slot pointing downwards. Push the arm into the hitch arm attachment bracket.
To insert the wheel arms depress the smaller knob and push the wheel arm in until the big button engages.
Parts supplied:
Jogging kit: 16” wheel and two wheel arms with ‘click system’
Push the Q.R. axle through the hollow wheel axle and screw on the nut. Both Q.R. springs must be located on each side of the Q.R. axle in such a way that the narrower side of the spring points towards the centre of the rear wheel hub.
Tip the transporter backwards and rest it on the handlebar. Then insert the wheel | Close the Q.R. lever. |
into the slots. |
|
In order to ensure that the hub is clamped sufficiently in the slots, the Q.R. lever must begin gripping as it moves from the open to the middle position, and approaching the closed position you should clearly feel resistance as you tighten. If it is too easy or too difficult to move the quick release lever, tighten or loosen the Q.R. lock nut on the other side of the hub.
21