AMX MAX-CSD 10, MAX-CSE manual NetLinx Settings, Changing Video and Audio Settings

Page 39

MAX-CSE Web Interface

Changing Video and Audio Settings

1.From the A/V Setup page, select from Composite or S-Video from the Video In radio buttons.

2.Select from NTSC or PAL from the Video Port radio buttons.

3.Enter the appropriate value in the Mic Gain field. Click Set to lock the entry.

4.To save the changes, click the Apply button on the top of the page. To return to the previously saved settings, click Cancel.

NetLinx Settings Page

The NetLinx Settings page (FIG. 18) is accessed by clicking on the NetLinx button in the Navigation Bar. This page allows a user (with the proper access rights) to specify which Master is to be used for communication, query, and firmware updating.

FIG. 18 NetLinx Settings page

The Encryption fields on a MAX-CSE are not enabled. To establish a connection to a target Master, both the ICSP Connectivity and Encryption requirements should be disabled from within the Master’s System Security Details page (FIG. 19).

These options must not be selected if the MAX unit is trying to establish a connection to a target NetLinx Master.

FIG. 19 NetLinx Master UI: System Security Details Page

MAX-CSE/MAX-CSD10 Operation/Reference Guide

33

 

 

Image 39
Contents MAX-CSE/MAX-CSD10 AMX Limited Warranty and Disclaimer Table of Contents MAX-CSD10 Web Interface Configuration and Firmware Update Page MAX-CSE FG2178-70 Components MAX Encoder FeaturesMAX-CSE Video Encoder OverviewMAX-CSE Specifications MAX-CSE Product SpecificationsWhile in IR mode Sensing for IR ports MAX-CSD10 FG2178-72 Components MAX-CSD10 Product SpecificationsMAX Decoder Features MAX-CSD10 Video DecoderAAC MAX-CSD10 FG2178-72 SpecificationsMAX-CSD10 Specifications Page Port Assignments and Functionality MAX-CSE and MAX-CSD10 InstallationMAX-CSE and MAX-CSD10 Connections and Wiring Wiring Guidelines Direct PowerWiring Guidelines Indirect Power via PoE Wiring length guidelinesPreparing captive wires Wiring a power connectionCSE MAX-CSE PoE Special wiring instructionsVDC power Supply Wiring the MAX-CSE connectors and cablesMIC Ethernet/RJ-45 Port Connections and WiringEthernet RJ-45 Pinouts and Signals Signals Connection Pairing ColorPower over Ethernet PoE wiring DB9 Device Port Connections and WiringEthernet LEDs IR/Serial Port Connections and Wiring Input/Output I/O Port Connections and WiringRS-232/422/485 Device Port Wiring Specifications Wiring the MAX-CSD10 connectors and cables Port Wiring SpecificationsPin Signal Function Installing Into an Equipment Rack Page Security Terms Default Security ConfigurationMAX-CSE Web Interface Security TermsDefault Security Configuration case-sensitive Administrator accountCommunicating with the unit via the browser-based UI Browser-based UI Application Overview MAX-CSE User Interface Overview and FeaturesUser Interface Features Feature Description Navigation BarAdministration Page Features Feature DescriptionStream Status Example Computer Course AdministrationAdministration Feature Description ResourcesChanging the Program Description ModeUpload Firmware Upgrading New Firmware Click Upload a File Click Reboot done. Upload a FileStream Profiles Stream ProfilesStream Profiles Page Features Feature Description Encoder ProfileVideo Audio ResolutionStream SVCD, MP3Obtaining the IP information for a target Modero SAP SettingsChanging the Encoder Profile Encoder Profiles and ParametersVCR Set up Set up Page FeaturesFeature Description Video Changing Video and Audio Settings NetLinx SettingsFeature Description NetLinx Master NetLinx Settings Page FeaturesChanging the NetLinx Master Connection IP SettingsDNS Address Changing the IP SettingsIP Settings Page Features Feature Description IP AddressUser Page Features Feature Description UserUser Changing User Settings Navigation frame MAX-CSD10 User Interface Overview and FeaturesFeature Description Browser Address field MAX-CSD10 Web InterfaceFeature Description Stream Status frame LogoffActive Page frame Updating Firmware Communicating With The Unit Via the Browser-based UIStream Selector Stream Selector Page FeaturesStream Set-up Stream Set-up Page FeaturesChanging the stream configuration Setting up an SAP stream configurationSetting up an Rtsp stream configuration Stream Configuration Page Manual Mode Setting up a Manual stream configurationNetLinx Audio/Video Page FeaturesNetLinx Page Features Audio/VideoTo make changes to the IP Settings User Page Details To change the User Login SettingsReading the Front Panel LCD Configuring CommunicationObtaining the unit’s initial Dhcp Address Configuring the MAX Communication ParametersSave login profile selection box Communicating with the Target Master via an IP Assigning Master Communication Settings and TCP/IP Settings Associating a MAX-CSE to a Target Master Associating the MAX unit to a Target MasterStudio Online Tree tab showing the communicating MAX unit Changing the MAX-CSE device number via Studio Changing the MAX’s Device NumberAssociating a MAX-CSD10 Unit to a Target Master Changing the MAX-CSE device number via the UIRecommended NetLinx Device numbers Using the ID button to change the MAX-CSE’s Device ValueChanging the MAX-CSD10 device number via the UI Verifying the MAX’s current version of Firmware via the UI Configuration and Firmware UpdateBefore You Begin MAX vs. NetLinx Master Functional OverlapUpgrading MAX Firmware Verifying the MAX’s current version of Firmware via StudioUpgrading MAX-CSE Firmware via the UI Upgrading the MAX’s Firmware via NetLinx Studio Upgrading MAX-CSD10 Firmware via the UIClick Close once the download process is complete Requirements for Receiving Streamed Content Displaying Stream ContentObtaining the IP Address of the target panel Setting up a Modero Panel to Receive and Display a StreamSystem Settings Configuring the MAX-CSE for communicationStream Profiles V Setup Configuring the MAX-CSE audio/video inputsSetting up a streaming page within TPDesign4 Rtpmpeg#//IP Address of MAX-CSETarget Video Port Establishing the final connection between the two units Video Adjustment page showing default valuesSetting up a Computer to Receive and Display a Stream Configure the MAX-CSE for communication to a computerObtaining the IP Address of the target computer Displaying Stream Content RTP Video Stream Component RTP Audio Stream Component Page Port/Description NetLinx ProgrammingDevicePortSystem DPS Port AssignmentsGET Asource MAX-CSE Streaming Commands PortMAX-CSE Streaming SendCommands Command DescriptionGET SAP GET SAP IP ModeGET Format GET GainGET Session Info GET Session ListGET Stream Status GET URL GET VideoGET Video Port Status SET Audio GET VsourcePlay SET AsourceSET SAP SET SAP IP ModeSET Format SET GainSendcommand ENCODER,SET Video MPEG2 D1 6000 CBR SET URLSET Video Stop MAX-CSD Streaming Commands PortMAX-CSD Streaming SendCommands SET VsourceGET Control Mode GET Rtsp ServerGET Session Cursor Sendcommand DECODER, GET Session Info 2 MEDIA2 Sendcommand DECODER, GET Session Info 1 TitleSendcommand DECODER, GET Session Info 2 Title Sendcommand DECODER, GET Session Info 2 MEDIA1Sendcommand DECODER,SET Audio MP3 Sendcommand DECODER,GET URLSendcommand DECODER,GET Video Sendcommand DECODER, PlaySendcommand DECODER, SET SAP IP Mode ALT SET Control ModeSendcommand DECODER, SET Control Mode SAP Sendcommand DECODER,SET Format PALSET Session Cursor Sendcommand DECODER, SET Sesson CursorSendcommand DECODER,SET URL UDP 224.0.0.1 Sendcommand DECODER,SET Video MPEG2RS-232/422/485 SendCommands RS-232/422/485 SendCommands PortGET Baud ChardmCtspsh Ctspsh OFFTset Baud RxoffRxon SET BaudXoff RS232/422/485 Ports ChannelsRS232/422/485 Ports Channels TxclrRS-232/422/485 SendString Escape Sequences RS-232/422/485 SendString Escape Sequences PortIR / Serial Ports Channels IR/Serial Port Port 3 CommandsIR/Serial SendCommands IR / Serial Ports ChannelsGET Mode CtofCton PON IroffPOD POFPtof PtonSET IO Link Short cable length 10 feet SET ModeSendcommand IR1,SET Mode IR Sendcommand IR1, SP,25Xchm Sendcommand DEV,XCHM extended channel modeSendcommand IR1,XCHM Sendcommand IR1,XCHGET Input Port Commands PortSend Commands IR RX Port Channels PortBACKLIGHT-50 LCD Commands PortBacklight BACKLIGHT-0Page Programming MAX-CSE/MAX-CSD10 Operation/Reference Guide 103 It’s Your World Take Control
Related manuals
Manual 2 pages 62.62 Kb Manual 116 pages 15.94 Kb

MAX-CSD 10, MAX-CSE specifications

The AMX MAX-CSE and MAX-CSD 10 are advanced multimedia presentation systems designed to enhance communication and collaboration in various professional environments. These devices are tailored for modern conference rooms, educational institutions, and corporate settings, providing seamless integration of audio-visual technology to facilitate effective presentations and meetings.

One of the standout features of the MAX-CSE and MAX-CSD 10 is their sophisticated audio and video processing capabilities. The MAX-CSE serves as a central management hub, supporting high-definition video outputs and multiple input sources, including HDMI, VGA, and wireless connectivity options. This versatility ensures that users can connect a wide array of devices—laptops, tablets, and smartphones—without hassle and quickly switch between them during presentations.

The MAX-CSD 10 complements the MAX-CSE as a dedicated audio unit equipped with powerful amplification and precise tuning. It delivers clear and balanced sound, even in larger rooms, ensuring that every participant can engage fully, regardless of their location in the space. With features like echo cancellation and noise reduction technology, the MAX-CSD 10 enhances voice clarity, making it ideal for video conferencing and webinars.

An important characteristic of the AMX MAX series is their user-friendly interface. The systems are designed for intuitive operation, enabling users to control various settings with ease, whether they are tech-savvy or not. The touch panel interface can be customized to meet specific needs, allowing quick access to essential functions such as lighting, video routing, and audio control.

In terms of connectivity, both systems are equipped with robust network capability, allowing integration with existing IT infrastructure. This feature ensures that users can manage and control the systems remotely through a web interface or compatible applications, enhancing productivity and easing the overall user experience.

Robust security measures are also a significant aspect of the AMX MAX-CSE and MAX-CSD 10 systems. They are designed with advanced encryption and user authentication protocols, ensuring that sensitive data remains protected during presentations and meetings.

In conclusion, the AMX MAX-CSE and MAX-CSD 10 multimedia presentation systems stand out in the market due to their superior audio and video quality, user-friendly features, and extensive connectivity options. They are ideal solutions for professionals seeking to leverage technology for more productive and engaging communication.