Fisher-Price 76950 owner manual Removing Your Vehicle from the Base

Attaching Your Vehicle to the Base Removing Your Vehicle from the Base

3

Cam Tab

“U” Portion of

U-Clip

•Push the vehicle forward slightly to engage the t-slider in the slot on the base. (The t-slider is on the underside of the vehicle.) The cam tabs should now be directly above the “U” portion of the U-clips.

4	PRESS HERE
	PUSH DOWN HERE

No Gap

•Position your knee on the vehicle seat and lean firmly on the seat.

the cam drivers pop into the U-clips. There should be no gap between the cam drivers and the U-clips.

•To make sure the vehicle is properly secured to the base, lift the vehicle. If the front or the rear wheels lift away from the base, the vehicle is not properly attached to the base. Repeat the above procedure to attach the vehicle to the base.

•With the vehicle properly attached to the base, it is ready for use as a battery powered rocking kiddie-ride.

Removing Your Vehicle from the Base

Fenders

PULL HERE

Base	STEP
	HERE

•Place both feet on the base to hold it in place.

•Grip the vehicle fenders.

•Pull up firmly to release the rear wheel drivers from the U-clips.

•Slide the vehicle back slightly to release the T-slider from the slot and remove the vehicle from the base.

•Set the base aside. Your vehicle is ready for foot-to-floor freewheeling use, or for use as a battery-powered ride-on vehicle.

•While pushing down firmly on the vehicle seat, press the power button to rotate the rear wheels and seat

the cam drivers in the U-clips. You will feel and hear 22