K
Attaching Your Vehicle to the Base Removing Your Vehicle from the Base
Attaching Your Vehicle to the Base
1 | Handlebar |
|
|
Button | Push Here |
| |
|
|
| |
|
| Selector | |
|
| Lever |
|
| FREEWHEEL | MOTORIZED |
|
|
| HEEL | TORIZED |
|
| FREEW | |
|
| O | |
|
| M | |
|
| Selector Lever |
|
•To assemble the vehicle to the base, the vehicle should be set to the MOTORIZED position. Press the handlebar button to make sure the vehicle is set to MOTORIZED. If the vehicle does not move forward when the handlebar button is pushed, it is set to FREEWHEEL.
•To switch the vehicle from FREEWHEEL to MOTOR- IZED, unlock and remove the seat. Press the handlebar button and at the same time switch the selector lever to the MOTORIZED position.
2 |
|
Rear Wheels |
|
| Cam |
| Tab |
Pull Wheel Out | |
Base |
|
| Inset |
| Cam |
| Tab |
| Down |
•Place the base on the floor.
•Turn the vehicle’s rear wheels to position the cam tabs down, as shown. (See inset.)
•Position the vehicle over the base so that the rear wheels are above the
•Pull out to spread the rear wheels and lower the vehi- cle on the base so that the cam tabs rest on the
21