REMOVE RESTRAINT BELT M
REMOVE SHARP
SCREW AND BELT
Using a Phillips screwdriver, remove sharp screw and restraint belt M.
REPLACE SHARP SCREW
Insert sharp screw through end of arm, fabric grommet and into rivet nut.
POSITION ARM
Position arm between canopy and frame.
Align arm hole over fabric grommet and rivet nut.
TIGHTEN SHARP SCREW
Tighten firmly with
Phillips screwdriver.
Note:
If screw does not turn easily, unscrew and start again.
REMOVE RESTRAINT BELT F
REMOVE SHARP
SCREW AND BELT
Using a Phillips screwdriver, remove sharp screw and restraint belt F.
REPLACE SHARP SCREW
Insert sharp screw through end of arm, fabric grommet and into rivet nut.
POSITION ARM
Position arm between canopy and frame.
Align arm hole over fabric grommet and rivet nut.
TIGHTEN SHARP SCREW
Tighten firmly with
Phillips screwdriver.
Note:
If screw does not turn easily, unscrew and start again.
OMA09D | P10 |