ATTACH RESTRAINT BELT F
BUCKLE BELT | POSITION ARM |
Connect restraint belt F | Position arm between canopy |
to restraint belt M. | and frame. |
| Align arm hole over fabric |
| grommet and rivet nut. |
POSITION RESTRAINT BELT F
Slide restraint belt F grommet between end of 
arm and fabric grommet.
INSERT SHARP SCREW
Insert sharp screw through end of arm, restraint belt grommet, fabric grommet and into rivet nut.
TIGHTEN SHARP SCREW
Hold strap at a 90 degree angle.
90° 
Tighten firmly with
Phillips screwdriver.
Note:
If screw does not turn easily, unscrew and start again.
PREPARE STROLLER FOR INFANT CAR SEAT INSTALLATION
SET PARKING BRAKE | POSITION CANOPY | UNBUCKLE |
|
| RESTRAINT BELT |
See the “Parking Brake” | Position canopy | Unbuckle restraint belt. |
section of your stroller | against handle bar. | Place ends outside seat. |
owner’s manual. |
|
|
OMA09D | P4 |