Britax 50 manual Lap-Belt Installation

Page 12

Installation: Rear-facing

Installation: Rear-facing

Lap-Belt Installation

 

 

 

• Figure A illustrates a typical rear-facing, lap-belt

 

installation.

 

• When not in use, always store the LATCH

 

connectors in storage slots. See page 34.

 

• See vehicle owner’s manual to determine what

 

type of retractor your vehicle has and how to

A

lock it (also see pg 10-13).

IMPORTANT: This child seat is shipped with the

 

 

buckle in position 1 (Fig. B). Use buckle position

 

1 or 2 that is closest to but not underneath your

 

child. Do not use buckle position 3 in rear-facing

 

mode. See page 38 for Adjusting Harness Buckle

 

Position.

 

1 Recline the child seat and then place it rear- facing on vehicle seat. This child seat must be b in the recline position when installed rear-facing.

See Recline Adjustment on page 34.

2Pull the vehicle belt out and pass it through the closest rear-facing belt slot (Fig. C).

3Route the vehicle belt across the child seat

then through the second rear-facing belt slot.

IMPORTANT:

•The vehicle belt must rest IN FRONT OF the c child seat buckle when using buckle slots 1 or

2 (Fig. B).

•Vehicle belt can be routed over or under the cover.

4Verify that the vehicle belt is not twisted and then buckle (Fig. D).

5Push the child seat firmly into the vehicle seat while removing slack from the vehicle belt.

•Ensure the vehicle seat belt system is locked.

WARNING! Do not use this seat with a two-point Emergency Locking Retractor (ELR) vehicle belt that does not lock.

6Verify that the vehicle belt is tight, locked, and that the child seat is secure.

•The child seat is secure when it cannot be moved more than one inch (2.5 cm) front-to- back or side-to-side at the belt path.

•When properly installed in the rear-facing position, the back angle of the child seat should be 30º – 45º from vertical (not to exceed 45º) when the car is parked on a level surface (Fig. F).

•If necessary, the proper recline angle can be achieved by placing a rolled towel or pool noodle in the crease of the vehicle seat to level the child seat’s base.

•Rear-facing installation can be improved by the use of the Versa-Tether see pages 29 - 32.

d

f

20

21

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Roundabout Table of Contents If the following are not observed Death or Serious Injury can OccurImportant Notes CertificationRegistration Serial Number Batch Number Date of ManufactureImportant Harness Adjustments Rear-FacingForward-Facing Rear-FacingChild Seat Features Switchable Retractor in ALR with Sliding Latch Plate Compatible Vehicle Seat Belts Lap-Shoulder 3-Point BeltELR Emergency Locking Retractor with Locking Latch Plate Lap Belt ALR Automatic Locking RetractorLocking Latch Plate Incompatible Vehicle Belts Vehicle Buckle PositionsVehicle Seating Positions Latch Installation Figure a illustrates a rear-facing Latch installationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb Rear-Facing Installation Forward-Facing InstallationSafety Information For forward-facing aircraft installation FigUsing the Versa-Tether Tether Connector StrapApproved tether anchorage locations That the child seat is properly securedSwitching the Latch Mode Energy-Absorbing Versa-TetherHas released on either side, the child seat is no Child seatUsing the Locking Clip Recline AdjustmentAdjacent slots Adjusting Harness Slot Height Chest ClipHarness Buckle Releasing the Chest Clip SqueezeAdjusting Harness Buckle Position Instructions on pages 26Child Seat Cover Removal Remove the entire cover from child seatCleaning the Cover Cleaning the ShellCleaning the Harness Cleaning the Harness BuckleWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.
Top Page Image Contents