Britax 50 manual Energy-Absorbing Versa-Tether, Switching the Latch Mode, Child seat

Page 18

Installation: Versa-Tether®

Child Seat Functions

Energy-Absorbing Versa-Tether

The energy-absorbing Versa-Tether was designed to enhance the performance of the child seat tether. By introducing a staged release of the tether webbing, the forward movement of the child seat is delayed while reducing the amount of energy transferred to the child seat during a crash. A secondary benefit of the energy- absorbing Versa-Tether is to help indicate when the child seat has been involved in a moderate or severe crash and replacement of the child seat is necessary.

Figure A shows the tether when the child seat

 

 

is acceptable for continued use (provided the

 

child seat has not been involved in a crash). The

 

colored stitching will be intact and the webbing

 

will be looped inside the shell.

 

Figures B and C show the tether when the child

a

seat is unacceptable for continued use. If one or

both of the loops have pulled through the back

 

 

side of the shell and/or any of the colored stitching

 

has released on either side, the child seat is no

 

longer acceptable for use. Discontinue use of the

 

child seat.

 

IMPORTANT: Regardless of whether loops have

b

pulled through the back side of the shell and the

 

 

colored stitching has been released, discontinue use

 

of the child seat if it has been involved in a moderate

 

or severe crash.

 

Switching the LATCH Mode

The LATCH connector strap must be switched to the correct belt path for rear-facing (Fig. D) versus forward-facing (Fig. E) installation modes.

Complete the following procedure to switch the LATCH mode.

1Lift the front of the child seat cover to access the LATCH connectors.

2Pull the LATCH strap and connectors from the child’s right side of the child seat.

3Thread the LATCH strap and connectors through the appropriate belt path for the installation procedure you wish to use.

IMPORTANT: When installing this child seat in rear- facing mode, the LATCH strap must rest IN FRONT OF the child seat buckle when using buckle slots 1 or 2 (Fig. E).

NOTE: To ensure LATCH connector is properly aligned with the vehicle LATCH anchor, the red release button on the connector should face away from the vehicle seat back, and the larger of the two connector sections is on top (Fig. F).

4Replace the cover and continue with LATCH installation procedure.

d

e

F

Release Top Button

c

G

32

33

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Roundabout Table of Contents If the following are not observed Death or Serious Injury can OccurRegistration Important NotesCertification Serial Number Batch Number Date of ManufactureForward-Facing Important Harness AdjustmentsRear-Facing Rear-FacingChild Seat Features Switchable Retractor in ALR with Sliding Latch Plate Compatible Vehicle Seat Belts Lap-Shoulder 3-Point BeltELR Emergency Locking Retractor with Locking Latch Plate Lap Belt ALR Automatic Locking RetractorLocking Latch Plate Incompatible Vehicle Belts Vehicle Buckle PositionsVehicle Seating Positions Latch Installation Figure a illustrates a rear-facing Latch installationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb Safety Information Rear-Facing InstallationForward-Facing Installation For forward-facing aircraft installation FigApproved tether anchorage locations Using the Versa-TetherTether Connector Strap That the child seat is properly securedHas released on either side, the child seat is no Switching the Latch ModeEnergy-Absorbing Versa-Tether Child seatUsing the Locking Clip Recline AdjustmentAdjacent slots Harness Buckle Adjusting Harness Slot HeightChest Clip Releasing the Chest Clip SqueezeAdjusting Harness Buckle Position Instructions on pages 26Child Seat Cover Removal Remove the entire cover from child seatCleaning the Harness Cleaning the CoverCleaning the Shell Cleaning the Harness BuckleWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.
Top Page Image Contents