Britax 50 Harness Buckle Removal, Cleaning the Cover, Cleaning the Shell, Cleaning the Harness

Page 23

Care and Maintenance

Care and Maintenance

Harness Buckle Removal

1Recline the child seat.

2Locate the metal buckle strap retainer on bottom of the child seat.

3Pull retainer away from child seat to loosen.

4Turn the retainer so the short side will go through the slot in child seat shell (Fig. A).

5Push the retainer through slots in the shell and cover, to the top of the child seat.

A

Cleaning the Cover

•HAND WASH using cold water and mild soap.

•LINE or LIE-FLAT DRY to prevent cover from shrinking.

•DO NOT bleach, machine wash, machine dry, or iron the cover.

Cleaning the Shell

•SPONGE CLEAN using warm water and mild soap.

•TOWEL DRY

•DO NOT use solvents, abrasive cleaners, or disassemble the harness.

Re-threading the Harness Buckle

IMPORTANT: See Adjusting Harness Buckle Position on page 38 for important instructions on proper buckle placement based on your child’s size.

1Locate slot in cover and shell for harness buckle.

2Turn the buckle retainer so the short side will go through the slot in the cover and child seat shell (Fig. A).

3Push the retainer through slots in the shell and cover, to the bottom of the child seat.

4Pull harness buckle away from child seat until tight and verify the strap is not twisted and the release button is facing outward.

Cleaning the Harness

•SPONGE CLEAN using warm water and mild soap.

•TOWEL DRY

•DO NOT bleach, machine wash, machine dry, iron or disassemble the harness.

Cleaning the Harness Buckle

If a child eats and drinks while in the child seat, the harness buckle may need to be periodically checked and cleaned of any accumulated food, drink or other debris.

•REMOVE BUCKLE as described on page 43.

•THOROUGHLY RINSE using warm water (Fig. A A).

•TEST THE HARNESS BUCKLE by fastening

and unfastening until an audible click is heard after inserting each buckle tongue (Fig. B). If either click is not heard, repeat cleaning

procedure.

CLICK

 

x 2

•TOWEL DRY

•DO NOT lubricate, use solvents, abrasive b cleaners, soap or other household detergents.

42

43

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Roundabout Table of Contents Death or Serious Injury can Occur If the following are not observedSerial Number Batch Number Date of Manufacture Important NotesCertification RegistrationRear-Facing Important Harness AdjustmentsRear-Facing Forward-FacingChild Seat Features ELR Emergency Locking Retractor with Locking Latch Plate Switchable Retractor in ALR with Sliding Latch PlateCompatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Locking Latch Plate Lap BeltALR Automatic Locking Retractor Vehicle Seating Positions Incompatible Vehicle BeltsVehicle Buckle Positions Figure a illustrates a rear-facing Latch installation Latch InstallationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb For forward-facing aircraft installation Fig Rear-Facing InstallationForward-Facing Installation Safety InformationThat the child seat is properly secured Using the Versa-TetherTether Connector Strap Approved tether anchorage locationsChild seat Switching the Latch ModeEnergy-Absorbing Versa-Tether Has released on either side, the child seat is noAdjacent slots Using the Locking ClipRecline Adjustment Releasing the Chest Clip Squeeze Adjusting Harness Slot HeightChest Clip Harness BuckleInstructions on pages 26 Adjusting Harness Buckle PositionRemove the entire cover from child seat Child Seat Cover RemovalCleaning the Harness Buckle Cleaning the CoverCleaning the Shell Cleaning the HarnessWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.
Top Page Image Contents