Britax 50 manual Chest Clip, Harness Buckle, Adjusting Harness Slot Height

Page 20

Child Seat Functions

Chest Clip

Fastening the Chest Clip: Fasten the chest clip by pushing the two halves together until a positive click is heard (Fig. A).

Releasing the Chest Clip: Squeeze the

 

middle tab together and pull apart the two

A

pieces (Fig. B).

Adjusting the Chest Clip: Slide chest clip up or down on harness so it is positioned at the middle of the child’s chest, level with the child’s armpits.

Harness Buckle

Fastening the Harness Buckle: Hold the harness buckle with one hand. Use the other B hand to insert one buckle tongue at a time into

the harness buckle (Fig. C).

NOTE: Proper connection is confirmed with

 

an audible click after inserting each buckle

 

tongue.

 

Releasing the Harness Buckle: Brace

 

the rear of the harness buckle with one

 

hand. Press the release button and slide

C

both tongues to remove from the buckle

(Fig. D).

 

IMPORTANT: Periodically clean the harness buckle to ensure safe operation. See pg 44.

D

Child Seat Functions

Adjusting Harness Slot Height

IMPORTANT: See Important Harness Adjustments on pages 6 – 7 for instructions on proper harness fit based on your child’s height and weight.

1

Loosen the harness by lifting the harness

 

 

adjuster lever while pulling both shoulder straps

 

 

forward as far as possible (Fig. E).

E

2

From the rear of the child seat, unhook the

 

shoulder harness from the harness yoke (Fig. F).

 

3

Pull straps through the shell, foam, and cover to

 

 

the front of the child seat.

 

4

Thread the harness straps through the

 

 

appropriate harness slots in the cover, foam,

 

 

and child seat shell (Fig. G).

 

5

Reattach harness straps to the harness yoke

F

 

(Fig. F).

6

Pull harness-adjuster strap to tighten the

 

 

 

harness.

 

 

 

7Verify all straps are threaded at the same height and are not twisted.

G

36

37

Image 20
Contents Roundabout Table of Contents If the following are not observed Death or Serious Injury can OccurImportant Notes CertificationRegistration Serial Number Batch Number Date of ManufactureImportant Harness Adjustments Rear-FacingForward-Facing Rear-FacingChild Seat Features ELR Emergency Locking Retractor with Locking Latch Plate Switchable Retractor in ALR with Sliding Latch PlateCompatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Locking Latch Plate Lap BeltALR Automatic Locking Retractor Vehicle Seating Positions Incompatible Vehicle BeltsVehicle Buckle Positions Latch Installation Figure a illustrates a rear-facing Latch installationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb Rear-Facing Installation Forward-Facing InstallationSafety Information For forward-facing aircraft installation FigUsing the Versa-Tether Tether Connector StrapApproved tether anchorage locations That the child seat is properly securedSwitching the Latch Mode Energy-Absorbing Versa-TetherHas released on either side, the child seat is no Child seatAdjacent slots Using the Locking ClipRecline Adjustment Adjusting Harness Slot Height Chest ClipHarness Buckle Releasing the Chest Clip SqueezeAdjusting Harness Buckle Position Instructions on pages 26Child Seat Cover Removal Remove the entire cover from child seatCleaning the Cover Cleaning the ShellCleaning the Harness Cleaning the Harness BuckleWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.