Britax 50 manual Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt

Page 7

Vehicle Compatibility

Compatible Vehicle Seat Belts

NOTE: The information in this section only applies to installation with vehicle safety belts.

Vehicle seats and safety belts differ from vehicle to vehicle. Refer to your vehicle owner’s manual for specific information about your vehicle safety belts and their use with child seats.

Lap-Shoulder (3-Point) Belt

1.ALR (Automatic Locking Retractor) with Sliding Latch Plate a Has a latch plate that freely slides

along the vehicle belt webbing.

Latch

Plate

b Has a retractor that stops the belt from being pulled out again once the belt webbing has been pulled out at least 24” (61 cm).

c Tightens by feeding the belt webbing back into the retractor.

Vehicle Compatibility

2.ELR (Emergency Locking Retractor) with Locking Latch Plate

a Has a latch plate that does not allow the lap part of the belt to become loose after it is buckled.

Latch Plate

b Has a retractor that locks only in an emergency situation such as sudden stop or crash.

3.Switchable Retractor in ALR with Sliding Latch Plate

aHas a latch plate that freely slides along the vehicle belt webbing.

Latch

Plate

b Has a retractor that can be switched to function as an ELR or an ALR by pulling the vehicle belt fully out until a clicking sound can be heard when retracting.

* To use a child seat with this type of vehicle belt, you will need to switch to the ALR mode or use the locking clip (page 35).

10

11

Image 7 Britax 50 Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt, Switchable Retractor in ALR with Sliding Latch Plate
Contents Roundabout Table of Contents Death or Serious Injury can Occur If the following are not observedSerial Number Batch Number Date of Manufacture Important NotesCertification RegistrationRear-Facing Important Harness AdjustmentsRear-Facing Forward-FacingChild Seat Features Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Switchable Retractor in ALR with Sliding Latch PlateELR Emergency Locking Retractor with Locking Latch Plate ALR Automatic Locking Retractor Lap BeltLocking Latch Plate Vehicle Buckle Positions Incompatible Vehicle BeltsVehicle Seating Positions Figure a illustrates a rear-facing Latch installation Latch InstallationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb For forward-facing aircraft installation Fig Rear-Facing InstallationForward-Facing Installation Safety InformationThat the child seat is properly secured Using the Versa-TetherTether Connector Strap Approved tether anchorage locationsChild seat Switching the Latch ModeEnergy-Absorbing Versa-Tether Has released on either side, the child seat is noRecline Adjustment Using the Locking ClipAdjacent slots Releasing the Chest Clip Squeeze Adjusting Harness Slot HeightChest Clip Harness BuckleInstructions on pages 26 Adjusting Harness Buckle PositionRemove the entire cover from child seat Child Seat Cover RemovalCleaning the Harness Buckle Cleaning the CoverCleaning the Shell Cleaning the HarnessWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.