Britax 50 manual IMPORTANTb

Page 15

Installation: Forward-Facing

 

Lap-Belt Installation

 

• Figure A illustrates a typical forward-facing, lap-

 

belt installation.

 

• When not in use, always store the LATCH

 

connectors in storage slots. See page 34.

 

WARNING!

A

 

• This child seat must not be used forward-

 

facing for children less than one year of age

 

OR who weigh less than 20 lbs (9.1 kg).

 

•Child seat must be in the full upright position when installed in forward-facing mode with children over 33 lbs (15.1 kg).

IMPORTANT:b

•The child seat is shipped with the buckle in position 1 (Fig. B). Use buckle position 1, 2 or 3 that is closest to but not underneath your child. See page 38 for Adjusting Harness Buckle Position.

•Britax recommends that the Versa-Tether be

used at all times. Using the tether will improve

 

the stability of the child seat and reduce the risk

C

of injury. Check your vehicle owner’s manual

for approved tether anchor locations.

1If the vehicle is equipped with an approved tether anchor for the chosen seating position, remove the Versa-Tether®from the pouch and place it up and over the child seat back.

2Place the child seat forward-facing on the vehicle seat

TIP: You may need to raise or remove the vehicle head restraint to achieve best fit of the child seat.

Installation: Forward-Facing

3Pull the vehicle belt out and thread it through the forward-facing belt path to the opposite side of the seat (Fig. C).

4Verify that the vehicle belt is not twisted and buckle (Fig. D).

5Push the child seat firmly into vehicle seat while tightening the vehicle belt.

•Ensure the vehicle seat belt system is locked. D

6 If the vehicle is equipped with an approved

tether anchor, attach the Versa-Tether®hook to an approved tether anchor. Remove all slack from tether to secure. Store excess webbing in the tether pouch. See pages 29 – 32.

7 Verify that the vehicle belt is tight, locked, and that the child seat is secure.

•The child seat is secure when it cannot be moved front-to-back or side- to-side more than 1 inch (2.5 cm.) at the belt path. If the child seat is not secure, repeat the installation process or use an alternate seating location.

WARNING! Do not use this seat with a two-point Emergency Locking Retractor (ELR) vehicle belt that does not lock.

26

27

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Roundabout Table of Contents Death or Serious Injury can Occur If the following are not observedSerial Number Batch Number Date of Manufacture Important NotesCertification RegistrationRear-Facing Important Harness AdjustmentsRear-Facing Forward-FacingChild Seat Features Switchable Retractor in ALR with Sliding Latch Plate Compatible Vehicle Seat Belts Lap-Shoulder 3-Point BeltELR Emergency Locking Retractor with Locking Latch Plate Lap Belt ALR Automatic Locking RetractorLocking Latch Plate Incompatible Vehicle Belts Vehicle Buckle PositionsVehicle Seating Positions Figure a illustrates a rear-facing Latch installation Latch InstallationLap-Shoulder Belt Installation Lap-Belt Installation Installation Forward-Facing Lap-Shoulder Belt Installation IMPORTANTb For forward-facing aircraft installation Fig Rear-Facing InstallationForward-Facing Installation Safety InformationThat the child seat is properly secured Using the Versa-TetherTether Connector Strap Approved tether anchorage locationsChild seat Switching the Latch ModeEnergy-Absorbing Versa-Tether Has released on either side, the child seat is noUsing the Locking Clip Recline AdjustmentAdjacent slots Releasing the Chest Clip Squeeze Adjusting Harness Slot HeightChest Clip Harness BuckleInstructions on pages 26 Adjusting Harness Buckle PositionRemove the entire cover from child seat Child Seat Cover RemovalCleaning the Harness Buckle Cleaning the CoverCleaning the Shell Cleaning the HarnessWarranty Double Check Every Time YOU USE this CAR Seat

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.
Top Page Image Contents