Installation Forward-Facing

Installation: Forward-Facing

LATCH Installation

• Figure A illustrates a forward-facing LATCH installation.

• Verify that your vehicle is equipped with LATCH anchors. If LATCH anchors are not available, you must use vehicle belt installation methods.

WARNING!

•This child seat must not be used forward-facing for children less than one year of age OR who weigh less than 20 lbs (9.1 kg).

•This child seat must be in full upright position when installed forward-facing for children who weigh more than 33 pounds (15.1 kg).

IMPORTANT: This child seat is shipped with the buckle B in position 1 (Fig. B). Use buckle position 1, 2 or 3 that is closest to but not underneath your child. See page 38 for

Adjusting Harness Buckle Position.

1If stored, remove the LATCH connectors from the storage slots under the cover (page 34) and

	pull both connectors competely through the
	child seat’s right side (Fig. C).
2	Press and hold the LATCH adjuster release	C
	button, then pull the LATCH strap to full length.	C
3	Thread one LATCH connector through the
3	Thread one LATCH connector through the
	forward-facing belt path to the opposite side of
	the child seat. Ensure that the LATCH strap is
	not twisted.
4	Remove the Versa-Tether from the pouch and
	place it up and over the child seat back.
5	Place the child seat forward-facing on the vehicle	D
	seat.
TIP: You may need to raise or remove the vehicle

head restraint to achieve best fit of the child seat.

Installation: Forward-Facing

6 Attach one LATCH connector to its adjacent
6 Attach one LATCH connector to its adjacent	Release	Top
vehicle LATCH anchor (Fig. D) in the upright	Button
position (Fig. E).

•An audible click confirms attachment.

•Ensure that the LATCH strap is not twisted.

TIP: You may need to turn the back of the child
	seat toward you for easier access to the vehicle	E
	LATCH anchor.
7	Attach the remaining LATCH connector to its
7	Attach the remaining LATCH connector to its
	adjacent vehicle LATCH anchor (Fig. F) in an
	adjacent vehicle LATCH anchor (Fig. F) in an
	upright position (Fig, E).
• An audible click confirms attachment.
• Ensure that the LATCH strap is not twisted.
NOTE: If an audible click is not heard when
connecting either LATCH connector, the LATCH strap
may be twisted, or there may be debris in the LATCH		F
connector. Correct either situation before continuing		F
with the installation process.
with the installation process.
8 Push the child seat into the vehicle seat while
8 Push the child seat into the vehicle seat while
	pulling the LATCH strap tight (Fig. G).
IMPORTANT: Ensure the LATCH strap does not fold
into the LATCH adjuster while tightening.
9	Attach the Versa Tether® hook to the vehicle’s
	designated tether anchor for the chosen
	seating position. Remove all slack from the	G
	tether to secure. Store excess webbing in the	G
	tether pouch. See pages 29 – 32.
	tether pouch. See pages 29 – 32.

10 Verify that all connections are secure and that the child seat is stable.

•The child seat is secure when it cannot be moved front- to-back or side-to- side more than 1 in. (2.5 cm) at the belt path. If the child seat is not secure, repeat the installation process or use an alternate seating location.

WARNING! Refer to your vehicle owner’s manual or contact the vehicle manufacturer for the maximum weight rating for their LATCH anchors. Use vehicle belt (not LATCH connectors) for installations with children who weigh more than the vehicle LATCH anchor limit. Unless specified otherwise by the vehicle manufacturer, assume a 40 lbs (18.1 kg) child is the vehicle LATCH anchor limit.

50 specifications

The Britax 50 is a leading vehicle safety seat designed to ensure the utmost protection for young passengers. Renowned for its comprehensive safety features, the Britax 50 stands out in a crowded market, delivering top-notch security and comfort.

One of the key features of the Britax 50 is its innovative SafeCell Impact Protection system. This technology includes a series of components designed to work in harmony to provide enhanced protection during a collision. The SafeCell base is engineered to compress and lower the center of gravity, which helps to reduce the risk of injury. Additionally, the integrated crumple zones absorb crash forces, further safeguarding your child.

Another notable characteristic of the Britax 50 is its unique head safety technologies. The Advocate model specifically features a versatile headrest, which provides superior side impact protection. The headrest can easily adjust to accommodate your child's growth while maintaining an optimal position to shield their head and neck during any impact.

Comfort doesn’t take a backseat with the Britax 50. The seat is equipped with plush padding and premium fabrics designed for both softness and durability. The seat’s design is also tailored to offer ample legroom, ensuring that children remain comfortable during long travels. The easy-to-remove cover allows for hassle-free cleaning, which is a significant advantage for parents managing spills and messes.

Installation of the Britax 50 is simplified through its User-Friendly Belt-Guide System. Parents can easily secure the seat in various vehicles without confusion. The ClickTight Installation feature is a standout, providing a clear and reliable way to ensure the seat is properly mounted using the vehicle seat belt.

The Britax 50 also comes with multiple recline positions, providing maximum comfort for infants and toddlers alike. The seat can be configured to various angles, ensuring optimal safety and comfort as your child grows.

In summary, the Britax 50 combines cutting-edge safety technologies, comfort, and user-friendly features, establishing itself as a solid choice for parents prioritizing their child’s wellbeing on the road. With its reputation for excellence and commitment to safety, the Britax 50 is more than just a car seat; it represents peace of mind for families everywhere.