Graco ISPC054BA Changing Harness Strap Slots, Point Models fig. e For Infants or Small Toddlers

Page 22

OPERATIONS and ADJUSTMENTS (continued)

7

ChangingHarnessStrapSlots:

A Loosen harness straps:

Pull and hold upper belt tab.

Pull harness straps out.

BRemove both shoulder harness strap loops from Splitter Plate on back of child restraint.

CChange harness strap slots.

Make sure harness straps are threaded through matching slot of seat pad and child restraint.

It may be necessary to remove seat pad from top of child restraint while relocating.

D Re-attach harness strap loops to Splitter Plate:

5-PointModels(fig.e):

•For Infants or Small Toddlers:

Put Top right strap loop on Splitter Plate first, then attach Top left strap loop.

NOTE: Make sure ends of straps are behind Splitter Plate.

•For Toddlers:

Put Bottom right strap loop on Splitter Plate first, then attach Bottom left strap loop.

OverheadShieldModels(fig.f):

Put right strap loop on Splitter Plate first, then attach left strap loop.

NOTE:

•Make sure both strap loops are securely attached within Splitter Plate hook.

•Make sure straps are NOT twisted and are routed behind stand (fig. g).

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Table of Contents Important Information Safety First Check ListRegistration Information Page Page Certification Basic InformationVehicle Seat Protection Vehicle Lower Anchor Points What is LATCH?Latch System for Vehicles Vehicle Seat CreaseLatch System Fig. a Child Restraint Lower Anchorage BeltRear-facing 5 to 30 lbs .2-13.6 kg Height & Weight LimitsOutgrowing Child Restraint Forward-facing 20 to 40 lbs to 18 kgREAR-FACINGINSTALLATION with Latch Fig. e Fig. dFORWARD-FACING Installation with Latch FORWARD-FACING Installation with Latch Tether Openings Pull to tightenREAR-FACING Installation with Vehicle Seat Belts Lap/shoulder belt FORWARD-FACING Installation with Vehicle Seat Belts FORWARD-FACING Installation with Vehicle Seat Belts Point Models Only Placing Child in Child RestraintCheck harness system Overhead Shield Models OnlyPlacing Child in Child Restraint Harness Straps fig. a Point Crotch Strap Adjustment fig. cOverhead Shield Adjustment fig. d Harness TieLower Tab Clip Upright Upper TabRecline For Toddlers Changing Harness Strap SlotsPoint Models fig. e For Infants or Small Toddlers Overhead Shield Models fig. fTop Loop Bottom Loop Splitter PlateLatch Belt Routing Latch belt. figFig. k Removing Latch from Vehicle Anchor Points Fig. mLatch storage Fig. q or rVehicle Seat Belts Vehicle Seat Belts Belts Forward of Seat CreaseLap Belts With Retractor Lap Belts Manually AdjustableFlip Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorCombination Lap/Shoulder Belt with Locking Latch Plate Combination Lap/Shoulder Belt with Sliding Latch PlatePull Locking Clip For storage of tether hook Additional InformationTether Storage Tether Hook Back of Child RestraintAvailable on some models Cup HolderRemoving Cup Holder Additional Information Removing Seat Pad all models Care & CleaningRemoving Overhead Shield Pad Harness Straps and Latch belt Aircraft UseSeat Pad and Overhead Shield Pad Shell and Overhead Shield Cup HolderPage Replacement Parts How to OrderShip to Model No ManufacturedCall US First Manual de instrucciones Utilización Tabla DE ContenidoAntes de Empezar Información especialInformación de registro Información ImportanteLista de control de seguridad Advertencia Prevenga lesiones graves o la muerte Orientación trasera debe nivelarse Advertencia Información BásicaSistema Latch para vehículos ¿QUÉ ES EL LATCH?Anclaje Anclaje Superior del Sistema LatchEl sistema Latch Punto de anclaje Superior del Vehículo Asiento de seguridadLímites DE Altura Y Peso Orientados hacia delante de 20 a 40 libras de 9 a 18 kgInstalación Orientada Hacia Atrás CON Latch Anclaje Aperturas Toallas Instalación Orientada Hacia Delante CON Latch Anclaje Aperturas Jale para Apretar Almacene el cinturón Latch vea la página 25, fig. q Guardado Toallas Instalación con cinturón de Seguridad para la cintura / hombroAjústelo si es necesario Fig. d Colocar AL Niño EN EL Asiento DE Seguridad Compruebe el sistema del arnésModelos Operaciones Y Ajustes Vertical ClipReclinada Para niños más grandes Modelos de 5 puntos fig. e Para bebés o niños pequeñosModelos con barra protectora fig. f Fig. e Bucle Placa de unión Fig. f SoporteColocación del cinturón Latch Usar el sistema Latch orientado hacia atrás. o Retirar el Latch de los puntos de anclaje del vehículo Abroche el sistema Latch en la barra de Almacenaje LatchBarra de almacenaje Cinturones DE Seguridad DEL Vehículo Cinturones ubicados delante del pliegue del asiento Pliegue del AsientoCinturones de regazo con retractor Cinturones de regazo ajustables manualmenteDéle la vuelta No SE Debe usar con ningún asiento Jale Fig. a Déle la vueltaPulgada 1 cm Almacenaje del anclaje Información AdicionalGancho del anclaje Parte trasera del asiento de seguridad Para quitar el portabebidas PortabebidasDisponible en algunos modelos PestañaEl cojín del cuerpo Los Modelos Cuidado y limpiezaRetirar la almohadilla de la barra protectora Armazón y apoyavasos de la barra protectora Asiento de seguridad para autos de segunda manoLas almohadillas del asiento y de la barra protectora HebillaNotas Lista DE Piezas Cómo efectuar pedidosEnvíe a De modelo Fabricado enLlámenos Primero

ISPC054BA specifications

The Graco ISPC054BA is a cutting-edge infant car seat designed to provide safety, comfort, and ease of use for both parents and their little ones. With a range of features and technologies, this car seat aims to enhance the traveling experience for families while ensuring the utmost protection for infants.

One of the standout features of the ISPC054BA is its TrueShield Technology, which incorporates advanced side impact protection. This system is designed to absorb and distribute crash forces, thereby reducing the risk of injury in the event of an accident. The car seat also meets or exceeds all safety standards set by the National Highway Traffic Safety Administration (NHTSA), offering parents peace of mind when traveling.

Comfort is another essential characteristic of the ISPC054BA. It boasts a plush infant insert that provides additional support for newborns, ensuring a snug and secure fit. The head support is adjustable, allowing it to grow with the child, while the seat includes a five-point harness that can be easily adjusted to accommodate infants as they grow. The installation process is straightforward, featuring Graco’s InRight LATCH system, which allows for quick and secure installation in vehicles.

In terms of convenience, the ISPC054BA is designed with parents in mind. The car seat features a lightweight design that makes it easy to carry and transfer between vehicles. An ergonomic handle provides comfort during transport, while the built-in canopy offers protection from the sun and rain during outdoor activities.

Another notable characteristic is the versatility of the ISPC054BA. It seamlessly transitions from car to stroller, making it an excellent addition to a travel system. The car seat is compatible with various Graco strollers, allowing parents to create a convenient travel solution without disturbing their sleeping baby.

Maintenance is also a breeze with this model. The car seat cover is removable and machine washable, ensuring that it remains clean and hygienic for everyday use. Parents will appreciate this feature, especially during messy outings.

In conclusion, the Graco ISPC054BA is a reliable infant car seat that combines safety, comfort, and convenience. With its innovative features like TrueShield Technology, easy installation, and compatibility with Graco strollers, it stands out as a top choice for modern families seeking a dependable and user-friendly car seat solution.
Top Page Image Contents