Graco ISPC054BA manual

Page 4

WARNINGS - Prevent serious injury or death:

Failure to follow these instructions

and child restraint labels can result

in child striking the vehicle’s interior

during a sudden stop or crash.

Secure child restraint with a vehicle

seat belt or LATCH that is properly

routed as shown in this manual.

Select a suitable location for the

child restraint in your vehicle.

Choose the correct mode of use for

the child restraint depending on

your child’s size. Infants less than

20 lbs. (9 kg) must use this child

restraint rear-facing. Serious

crippling injury or death can result

if infant faces front of vehicle. The

American Academy of Pediatrics

recommends that children should be

at least one year of age before being

positioned forward facing.

Vehicle seat belt system MUST hold

child restraint securely. Not all

vehicle seat belts can be used with

a child restraint.

If vehicle seat belt does not hold

child restraint securely, read

“Vehicle Seat Belts” section.

Never put a child restraint in a front

vehicle seat unless recommended

by vehicle owner’s manual.

National Highway Traffic Safety

Administration (NHTSA) alerts

vehicle owners that according to

accident statistics, children up to

age 12 are safer in the back seat.

For vehicles with air bags, refer to

vehicle owner’s manual for child

restraint installation information.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Table of Contents Important Information Safety First Check ListRegistration Information Page Page Certification Basic InformationVehicle Seat Protection What is LATCH? Latch System for VehiclesVehicle Lower Anchor Points Vehicle Seat CreaseLatch System Fig. a Child Restraint Lower Anchorage BeltHeight & Weight Limits Outgrowing Child RestraintRear-facing 5 to 30 lbs .2-13.6 kg Forward-facing 20 to 40 lbs to 18 kgREAR-FACINGINSTALLATION with Latch Fig. e Fig. dFORWARD-FACING Installation with Latch FORWARD-FACING Installation with Latch Tether Openings Pull to tightenREAR-FACING Installation with Vehicle Seat Belts Lap/shoulder belt FORWARD-FACING Installation with Vehicle Seat Belts FORWARD-FACING Installation with Vehicle Seat Belts Placing Child in Child Restraint Check harness systemPoint Models Only Overhead Shield Models OnlyPlacing Child in Child Restraint Point Crotch Strap Adjustment fig. c Overhead Shield Adjustment fig. dHarness Straps fig. a Harness TieLower Tab Clip Upright Upper TabRecline Changing Harness Strap Slots Point Models fig. e For Infants or Small ToddlersFor Toddlers Overhead Shield Models fig. fTop Loop Bottom Loop Splitter PlateLatch Belt Routing Latch belt. figFig. k Removing Latch from Vehicle Anchor Points Fig. mLatch storage Fig. q or rVehicle Seat Belts Vehicle Seat Belts Belts Forward of Seat CreaseLap Belts With Retractor Lap Belts Manually AdjustableFlip Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorCombination Lap/Shoulder Belt with Locking Latch Plate Combination Lap/Shoulder Belt with Sliding Latch PlatePull Locking Clip Additional Information Tether StorageFor storage of tether hook Tether Hook Back of Child RestraintAvailable on some models Cup HolderRemoving Cup Holder Additional Information Removing Seat Pad all models Care & CleaningRemoving Overhead Shield Pad Aircraft Use Seat Pad and Overhead Shield PadHarness Straps and Latch belt Shell and Overhead Shield Cup HolderPage Replacement Parts How to OrderShip to Model No ManufacturedCall US First Manual de instrucciones Tabla DE Contenido Antes de EmpezarUtilización Información especialInformación de registro Información ImportanteLista de control de seguridad Advertencia Prevenga lesiones graves o la muerte Orientación trasera debe nivelarse Advertencia Información BásicaSistema Latch para vehículos ¿QUÉ ES EL LATCH?Anclaje Sistema Latch El sistema LatchAnclaje Superior del Punto de anclaje Superior del Vehículo Asiento de seguridadLímites DE Altura Y Peso Orientados hacia delante de 20 a 40 libras de 9 a 18 kgInstalación Orientada Hacia Atrás CON Latch Anclaje Aperturas Toallas Instalación Orientada Hacia Delante CON Latch Anclaje Aperturas Jale para Apretar Almacene el cinturón Latch vea la página 25, fig. q Guardado Toallas Instalación con cinturón de Seguridad para la cintura / hombroAjústelo si es necesario Fig. d Colocar AL Niño EN EL Asiento DE Seguridad Compruebe el sistema del arnésModelos Operaciones Y Ajustes Vertical ClipReclinada Para niños más grandes Modelos de 5 puntos fig. e Para bebés o niños pequeñosModelos con barra protectora fig. f Fig. e Bucle Placa de unión Fig. f SoporteColocación del cinturón Latch Usar el sistema Latch orientado hacia atrás. o Retirar el Latch de los puntos de anclaje del vehículo Abroche el sistema Latch en la barra de Almacenaje LatchBarra de almacenaje Cinturones DE Seguridad DEL Vehículo Cinturones ubicados delante del pliegue del asiento Pliegue del AsientoCinturones de regazo con retractor Cinturones de regazo ajustables manualmenteDéle la vuelta No SE Debe usar con ningún asiento Jale Fig. a Déle la vueltaPulgada 1 cm Almacenaje del anclaje Información AdicionalGancho del anclaje Parte trasera del asiento de seguridad Portabebidas Disponible en algunos modelosPara quitar el portabebidas PestañaEl cojín del cuerpo Los Modelos Cuidado y limpiezaRetirar la almohadilla de la barra protectora Asiento de seguridad para autos de segunda mano Las almohadillas del asiento y de la barra protectoraArmazón y apoyavasos de la barra protectora HebillaNotas Lista DE Piezas Cómo efectuar pedidosEnvíe a De modelo Fabricado enLlámenos Primero

ISPC054BA specifications

The Graco ISPC054BA is a cutting-edge infant car seat designed to provide safety, comfort, and ease of use for both parents and their little ones. With a range of features and technologies, this car seat aims to enhance the traveling experience for families while ensuring the utmost protection for infants.

One of the standout features of the ISPC054BA is its TrueShield Technology, which incorporates advanced side impact protection. This system is designed to absorb and distribute crash forces, thereby reducing the risk of injury in the event of an accident. The car seat also meets or exceeds all safety standards set by the National Highway Traffic Safety Administration (NHTSA), offering parents peace of mind when traveling.

Comfort is another essential characteristic of the ISPC054BA. It boasts a plush infant insert that provides additional support for newborns, ensuring a snug and secure fit. The head support is adjustable, allowing it to grow with the child, while the seat includes a five-point harness that can be easily adjusted to accommodate infants as they grow. The installation process is straightforward, featuring Graco’s InRight LATCH system, which allows for quick and secure installation in vehicles.

In terms of convenience, the ISPC054BA is designed with parents in mind. The car seat features a lightweight design that makes it easy to carry and transfer between vehicles. An ergonomic handle provides comfort during transport, while the built-in canopy offers protection from the sun and rain during outdoor activities.

Another notable characteristic is the versatility of the ISPC054BA. It seamlessly transitions from car to stroller, making it an excellent addition to a travel system. The car seat is compatible with various Graco strollers, allowing parents to create a convenient travel solution without disturbing their sleeping baby.

Maintenance is also a breeze with this model. The car seat cover is removable and machine washable, ensuring that it remains clean and hygienic for everyday use. Parents will appreciate this feature, especially during messy outings.

In conclusion, the Graco ISPC054BA is a reliable infant car seat that combines safety, comfort, and convenience. With its innovative features like TrueShield Technology, easy installation, and compatibility with Graco strollers, it stands out as a top choice for modern families seeking a dependable and user-friendly car seat solution.
Top Page Image Contents