Safety Requirements

European Safety Standards specify the construction and performance of your car seat as well as its components, requirements for fitting and use, instructions and markings.

Your car seat has been approved to

European Standard

ECE R44.03

Semi-Universal/Universal group 0+, less than 13 kg. An approval number is attached to the rear of the seat and must not be removed.

NOTICE

(Seat Only)

The seat is a “Universal” child restraint. It is approved to Regulation No. 44.03 series of amendments, for general use in vehicles and it will fit all car seats.

Only suitable if the approved vehicles are fitted with 3 point static/with retractor safety belts, approved to UN/ECE Regulation No. 16 or other equivalent standards.

(Seat with Base)

The Base “Semi-Universal” child restraint. It is approved to Regulation No. 44.03 series of amendments, for general use in vehicles and it will fit most, but not all, car seats.

See the fitting guide on page 88-89.

Only suitable if the approved vehicles are fitted with 2 point static lap safety belt or 3 point static/with retractor safety belts, approved to UN/ECE Regulation No. 16 or other equivalent standards.