Graco deluxe series manual Using the level indicator, With or Without Base

Page 29

30Step 8.

To fold the load leg for storage, remove the car seat from the base and press the two knobs down to release.

WITH OR WITHOUT BASE:

Tighten belt as snugly as possible.

Twist and pull on car seat to be sure the vehicle belt holds it tightly.

WARNING: DO NOT use car seat in any vehicle seat position where vehicle belt does not hold car seat tightly.

NEVER leave a car seat or base unsecured in your vehicle. A loose car seat or base could be thrown into a passenger in a sudden stop or crash and cause serious injury or death.

31

32

Using the level indicator

Attached to the side of your car seat is a level indicator to help properly recline the car seat on the vehicle seat. It is very important for your child’s safety that your car seat be properly reclined. Proper use of the level indicator requires that your vehicle be parked on level ground during installation of the car seat.

DO NOT use car seat in a very upright position. The child’s head may drop forward and cause breathing problems.

DO NOT use car seat in a very reclined position. A crash could put too much force on a child’s neck and shoulders.

29

Image 29
Contents Graco B427-1-02 Manuel D’UTILISATION Boucle du harnais Page Base sold separately Base vendue séparément Page Page Page Page Page Page Page Page Page Page Page Page Graco Children’s Products PO BOX Basildon, Essex SS14 3GJ Safety Requirements Important safety points Page Important procedures On certain models Adjusting the handle Attaching Car seat to the baseFitting the harness Side-facing vehicle seat Choosing the seat locationInstalling the car seat Without Base Slide strap under the centre lap belt guide as shown With or Without Base Using the level indicatorSecuring your baby Graco Travel System Pushchairs Check that tray or arm bar is securely attached to pushchair Care and Maintenance Page Normes de sécurité Mesures de sécurité importantes Graco Page Ajuster la poignée Mesures ImportantesEtape Ajuster le harnaisEtape Du siège Choisir l’emplacementInstaller le siège de voiture Sans LA Base NE PAS laisser les sangles de la Avec OU Sans Base Utilisation d’un indicateur d’inclinaisonInstaller votre bébé Attachez Toujours le Les poussettes de Graco Travel SystemLa sangle sur elle-même avec le Velcro Usage et entretien Voiture Equipee D’UN Coussin Gonflable DE Securite Page Jaguar X Type MX5