24Step 3.
Pull lap section of belt through openings on each side of base.
25Step 4.
Slide strap under the centre lap belt guide as shown.
Step 5.
Buckle the vehicle belt, press down on base with your knee and pull vehicle belt tight to secure base.
DO NOT allow vehicle belt straps or car seat straps to become twisted. Keep them flat.
CHECK the buckle contact point and height.
26Incorrect
27Correct
If in doubt, contact either the car seat manufacturer or the retailer.
28
D
E
F
29
Step 6.
Clip shoulder belt into the shoulder belt clip to prevent vehicle belt from loosening.
WARNING: DO NOT catch shoulder belt between car seat and base. You must make sure shoulder belt is out of the way.
Belt opening
Shoulder belt clip
Centre belt guide
Step 7.
Push the car seat down until you hear a “click”. Pull up on the car seat to be sure it is securely latched into the base.
DO NOT use the base if the car seat does not latch securely.
28