19
A
B
C
WITHOUT BASE:
Step 2.
Place shoulder belt around the back of the car seat exactly as shown, making sure to run it through the center guides on the back of the seat and below the notch opposite the shoulder belt origin.
Put lap section of belt over car seat and under the two belt hooks. Buckle the vehicle belt.
Belt hooks
Centre guides
Notch opposite shoulder belt origin
Step 3.
Push car seat down into vehicle seat. Help the retractor to take up all the vehicle belt slack.
WITH BASE:
20Step 1.
Lift the bottom of the load leg up untill it clicks into place.
Caution: Keep fingers clear of moving parts.
21Step 2.
Place base on vehicle seat. Squeeze load leg adjustment button, raise or lower the load leg to proper height. Make sure the load leg is secure by pressing down on the front of the base.
Do not place base with loadleg on a ledge. If this occurs and the vehicle seat is adjustable, move it forward so that the foot is on the vehicle floor.
22Correct
23Incorrect
27