3.5 Attaching Canopy (on certain models)
1. | Infant restraint comes with four (two | |
| on certain models) identical canopy | |
| support parts. |
|
| Thread one canopy support completely |
|
| through one sewn tunnel . |
|
2. | Slide straight end of a second | |
| support into the straight end of the |
|
| first support . |
|
3.On models with four canopy supports, repeat
steps one and two for the other canopy tunnel. The canopy should appear as shown .
4.Attach canopy in the areas between the
infant restraint and the handle base .
To remove canopy:
Pull the canopy fabric back.
With both thumbs on the center of the canopy bow, wiggle back and forth while pulling out on the two parts of the canopy bow .
14