Testing the System, Operation, To Listen To Baby

Testing the System

It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units any time they may have been damaged or have not been used for a long time.

1.If two adults are present, have one take the Parent’s Unit to different locations, trying various volume settings, while the other speaks into the Nursery Unit.

2.If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it.

3.When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly.

4.If there is sound interference, switch both the Nursery Unit and the Parent’s Unit to the other channel setting.

NOTE: As with all radio frequency devices, transmission range and reception may vary. Your Nursery Monitor uses public airwaves, so it is possible for conversations near the Nursery Unit to be broadcast to other nursery monitors, radios, cordless phones or scanners outside your home. For your privacy, always turn off the Nursery Unit when not in use.

Operation

To Listen To Baby

•Check that Nursery Unit and Parent’s Unit are on the same channel.

•Turn on Nursery Unit using the ON/OFF switch.

•Turn on Parent’s Unit using the Volume ON/OFF switch.