Apollo 1550ETL, 1650ETL installation manual Location of Pivot Point, Vertical position, Pivot arm

OPERATOR INSTALLATION

STEP 1 PIVOT ARM INSTALLATION (standard pull to open)

Location of Pivot Point.

Notes:

PULL TO OPEN pulls gate open (actuator is extended when gate is in the closed position). PUSH TO OPEN pushes the gate open (actuator is retracted when gate is in the closed position).

For PUSH TO OPEN installations see page 12.

If a 400 Upgrade Kit is to be used, refer to the 400 instructions for pivot point location.

The following instructions provide up to 105o of swing.

Left Hand Swing Right Hand Swing

Gate (closed)

			Direction of
						13”
		13”
			opening
	6”						6”
				Top View
Measurements are taken from
the center of the hinge.
Vertical position					Center Line of attachment
of pivot arm					point for gate bracket

1/2”

Pivot ArmMust be level

Front View

Hinge post

7