Sony XC-ES50/50CE manual Specifications of WEN Write ENable Pulse

Page 12

XC-E series

ELECTRONIC SHUTTER

When using a trigger pulse like shown below, set the TRIG polarity selector switch on the rear panel to – :

T

A:4.0 to 5.0 V

B:0 to 2.0 V

A

B

T: 2 ∝s to 1/4 s, 100 ∝s to 1/4 s when setting the shutter speed using DIP switch

*

*

Input impedance: 10 kΩ or more

The voltage and pulse width used are measured at pin 11 of a 12-pin multi-connector on the rear panel.

Specifications of WEN (Write ENable Pulse)

A

B

T

A:5.0 V

B:0 V

T:15.875 ms (XC-ST70), 18.752 ms (XC-ST70CE)

*Output impedance: 10 kΩ or more

10

Image 12

Contents User’s Table of Contents Main Features OutlineSystem Configuration Specifications ComparisonMain Specifications Connection Diagram Volume control switch Location of Parts and OperationLens mount section C mount Camera mounting reference hole TopPhase Conditions of External Synchronization External synchronization for each modePhase conditions For Restart Reset RR/external trigger shutterDIP switch on the rear panel Setting of normal shutter speedElectronic Shutter Normal shutter∙ Mode 1 Non-reset mode ∙ Mode 2 Reset modeSetting of external trigger shutter speed ∙ Using DIP switch on the rear panel∙ Using trigger pulse width Specifications of trigger pulseSpecifications of WEN Write ENable Pulse Restart Reset R.R Long exposure∙ Timing and conditions Example 1 of Long exposureRestart Reset R.R Example 2 of long exposureTiming chart by restart/reset Frame Image Output with Strobe LightOutput Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIA Timing chart of horizontal output waveformOutput Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIA Camera video output signal Typical value Even field 312.5 H 305 H 578+579 580+581 579+580 581+582 Sensor Read Clock Timing Chart Sensor Read Clock Timing Chart XC-EI30 XC-EI50 For setting the shutter speed using TRG width HD/VD input∙ Continuous HD/VD input ∙ Continuous HD input and single VD input No HD/VD input Internal synchronization For setting the shutter speed using DIP switch Continuous HD/VD inputHD/VD input ∙ Continuous HD input and single VD input T = Under 10 ms T = 10 ms or more Reset Mode Timing Chart of External Trigger Shutter Mode 2 Reset Mode Dimensions Spectral Response Characteristics Typycal ValueSpectral Response Characteristics XC-EI30 XC-EI50 Various Lens Selection List of C-Mount LensXC-E series XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE