MAIN SPECIFICATIONS
Image pickup device
Number of effective pixels
CCD horizontal driving frequency
14.318 MHz
14.187 MHz
CCD vertical driving frequency | |||
| 15.734 kHz | ||
| 15.625 kHz | ||
Signal system | EIA/CCIR | ||
Cell size |
|
|
|
| 8.4 | (H)x9.8 (V) μ m | |
8.6 | (H)x8.3 (V) μ m | ||
| 6.35 (H)x7.4 (V) μ m | ||
6.5 | (H)x6.25 (V) μ m | ||
Lens mount | |||
Flange back | 17.526 mm | ||
Synchronization system Internal/external (Selected automatically)
External sync input/output
HD/VD (2 to 5
*Automatically selected according to the existence of an input signal
when the selection switch on the rear panel is set to EXT.
Allowable frequency deviation of external synchronization
±1 %
| (in horizontal synchronous frequency) | |
Jitter | Within ± 50 nsec | |
Scanning system | 2:1 interlacing |
|
|
| |
| (during external sync input) | |
Horizontal resolution |
| |
570 TV lines | ||
560 TV lines
Sensitivity |
|
400 lx F5,6 (γ =ON, MIN Gain, | |
| without IR cut filter) |
400 lx F4 (γ =ON, MIN Gain, | |
| without IR cut filter) |
400 lx F11 (γ =OFF, MIN Gain, | |
| without IR cut filter) |
400 lx F8 (γ =ON, MIN Gain, | |
| without IR cut filter) |
S/N ratio | 60dB |
Minimum illuminance
0.3lx (F1.4 γ =ON, MAX Gain, without IR cut filter)
Gain | AGC/Manual (Can be selected using | |
| the switch on the rear panel.) | |
Gamma correction | ON/OFF (Can be selected | |
|
| using the switch on the rear |
|
| panel.) |
Electronic shutter
1/100 to 1/10,000 seconds
1/120 to 1/10,000 seconds
External trigger shutter
1/4 to 1/10,000 seconds
*Set using the DIP switch on the rear panel, or variable with the trigger pulse width.
Supply voltage | +12 VDC (+9.0V to 16V) | |
Power consumption |
|
|
1.4W | ||
1.6W | ||
Operating temperature |
| |
Storage temperature |
| |
Performance assurance temperature
0 ˚C to +30 ˚C
Operating humidity 20 to 80 %
Storage humidity 20 to 95 %
3