Sony XC-ES50/50CE manual Connection Diagram

Page 6

XC-E series

MAIN SPECIFICATIONS

Shock resistance	70G
Outside dimensions 29 (W) x 29 (H) x 32 (D) mm
Weight	50 g
Standards	UL1492, FCC Class A Digital
	Device, and CE (EN50081-2 +
	EN50082-2)
Other	Restart Reset function
	Frame or field integration can be
	selected.
	Conforms to new EIAJ and uses
	12-pin assignment.
Accessories	Lens mount cap (1)
	Instruction Manual (1)

External synchronization for each mode

	Mode	Internal sync	External sync

			HD/VD	VS
			HD/VD	VS


	Normal

	Normal shutter
shuttertrigger	Mode 1			×
	Mode 1			×

External		Trigger signal
External	Mode 2	generates an	×	×
		internal VD
		(single) signal.

	Restart Reset	×		×

: Can be used. ×: Cannot be used.

CONNECTION DIAGRAM

C-mount lens

VCL-08Y-M

VCL-12Y-M

VCL-16Y-M

VCL-25Y-M

VCL-50Y-M

XC-ES50/50CE

XC-ES30/30CE

XC-EI50/50CE

XC-EI30/30CE

Tripod adaptor

VCT-333I

LO-77ERK

Close-up ring kit

Camera cable CCXC-12P02N CCXC-12P05N CCXC-12P10N CCXC-12P25N

AC

VIDEO OUT

HD/VD

WEN

TRIG

Camera adaptor

DC-700/CE

(Conforms to new EIAJ and uses 12-pin assignment.)

DC +12 V

VIDEO OUT

HD/VD

Junction box

JB-77

(No trigger input terminal is provided.)

Note : All functions of the XC-ES50/50CE, XC-ES30/30CE, XC-EI50/50CE, XC-EI30/30CE

cannot be used when using DC-777/CE, DC-77RR/CE, and JB-77 is used. Refer to the table shown below.

XC-ES50/50CE
XC-ES30/30CE	JB-77
XC-EI50/50CE
XC-EI30/30CE


Normal
Normal shutter
Restart Reset (R.R)

Restart Reset (R.R)
+
shutter
External trigger shutter	×

: Can be used.

×: Cannot be used.

4

Image 6

Contents User’s Table of Contents Main Features OutlineSystem Configuration Specifications ComparisonMain Specifications Connection Diagram Lens mount section C mount Volume control switchLocation of Parts and Operation Camera mounting reference hole TopPhase conditions Phase Conditions of External SynchronizationExternal synchronization for each mode For Restart Reset RR/external trigger shutterElectronic Shutter DIP switch on the rear panelSetting of normal shutter speed Normal shutterSetting of external trigger shutter speed ∙ Mode 1 Non-reset mode∙ Mode 2 Reset mode ∙ Using DIP switch on the rear panel∙ Using trigger pulse width Specifications of trigger pulseSpecifications of WEN Write ENable Pulse ∙ Timing and conditions Restart Reset R.RLong exposure Example 1 of Long exposureRestart Reset R.R Example 2 of long exposureTiming chart by restart/reset Frame Image Output with Strobe LightOutput Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIA Timing chart of horizontal output waveformOutput Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIA Camera video output signal Typical value Even field 312.5 H 305 H 578+579 580+581 579+580 581+582 Sensor Read Clock Timing Chart Sensor Read Clock Timing Chart XC-EI30 XC-EI50 For setting the shutter speed using TRG width HD/VD input∙ Continuous HD/VD input ∙ Continuous HD input and single VD input No HD/VD input Internal synchronization For setting the shutter speed using DIP switch Continuous HD/VD inputHD/VD input ∙ Continuous HD input and single VD input T = Under 10 ms T = 10 ms or more Reset Mode Timing Chart of External Trigger Shutter Mode 2 Reset Mode Dimensions Spectral Response Characteristics Typycal ValueSpectral Response Characteristics XC-EI30 XC-EI50 Various Lens Selection List of C-Mount LensXC-E series XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE