Sony XC-ES50/50CE manual Outline, Main Features

Page 3

XC-E series

OUTLINE

The XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE are industrial black-and-white video camera modules, each using a 1/3- or 1/2-inch IT CCD. The 1/3- and 1/2-inch C mount commonly used in industrial applications implements compact size and lightweight. Switching of each mode on the rear panel, which has been installed from the XC-ST series, is followed to provide improved operability. The XC-EI series uses a CCD which is sensitive on a near infrared area to capture a clear image even in low-intensity illumination. As with the existing devices, the XC- ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE incorporate significant shock and vibration resistance to support installation on FA equipment.

MAIN FEATURES

1/3" and 1/2" IT CCD

A CCD sensitive on a near infrared area is used for the XC-EI series.

External trigger shutter function

(XC-ES50/ES30, XC-EI50/EI30: 1/4 to 1/10,000 seconds,

XC-ES50CE/ES30CE, XC-EI50CE/EI30CE: 1/4 to 1/8,000 seconds)

Restart Reset (R.R) function

Inputting HD and VD signals (2 VD or more) continuously from the outside can catch one image at arbitrary time and control the stored CCD.

This function is used for long exposures and strobe with frame image output.

Synchronization system: Internal/external HD/VD

Inputting an HD/VD signal from the outside automatically establishes external synchronization. This function is effective for controlling multiple cameras efficiently from the external system.

Setting each mode on rear panel

The setting of each mode can be changed by the DIP switch.

Almost all switches are located on the rear panel. This feature permits easy setting after equipment is installed.

Compact and lightweight

Compared to the existing devices, the size and weight are reduced widely.

Each of the XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE can be used in applications using two-piece cameras.

C-mount

Excellent shock and vibration resistance

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents User’s Table of Contents Outline Main FeaturesSpecifications Comparison System ConfigurationMain Specifications Connection Diagram Camera mounting reference hole Top Volume control switchLocation of Parts and Operation Lens mount section C mountFor Restart Reset RR/external trigger shutter Phase Conditions of External SynchronizationExternal synchronization for each mode Phase conditionsNormal shutter DIP switch on the rear panelSetting of normal shutter speed Electronic Shutter∙ Using DIP switch on the rear panel ∙ Mode 1 Non-reset mode∙ Mode 2 Reset mode Setting of external trigger shutter speedSpecifications of trigger pulse ∙ Using trigger pulse widthSpecifications of WEN Write ENable Pulse Example 1 of Long exposure Restart Reset R.RLong exposure ∙ Timing and conditionsExample 2 of long exposure Restart Reset R.RFrame Image Output with Strobe Light Timing chart by restart/resetTiming chart of horizontal output waveform Output Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIAOutput Waveform Timing Chart XC-ES50/EI50/ES30/EI30EIA Camera video output signal Typical value Even field 312.5 H 305 H 578+579 580+581 579+580 581+582 Sensor Read Clock Timing Chart Sensor Read Clock Timing Chart XC-EI30 XC-EI50 For setting the shutter speed using TRG width HD/VD input∙ Continuous HD/VD input ∙ Continuous HD input and single VD input No HD/VD input Internal synchronization Continuous HD/VD input For setting the shutter speed using DIP switchHD/VD input ∙ Continuous HD input and single VD input T = Under 10 ms T = 10 ms or more Reset Mode Timing Chart of External Trigger Shutter Mode 2 Reset Mode Dimensions Typycal Value Spectral Response CharacteristicsSpectral Response Characteristics XC-EI30 XC-EI50 List of C-Mount Lens Various Lens SelectionXC-E series XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE
Top Page Image Contents