Pelco IS90 manual Camera Positioning, Positioning the Camera

Page 28

Camera Positioning

Rotate and tilt the camera module to position the camera.

NOTE: Do not over-rotate the module. Excessively turning the module in one direction could result in damage to the wiring.

ìTilt 140° (20° to 160°)

îPan 360°

ïRotation 360°

Figure 17. Positioning the Camera

28	C3425M-E (1/09)

Image 28

Contents IS90 Series Camclosure Page Contents List of Illustrations Regulatory Notices Radio and Television InterferenceDescription ModelsParts List IS90B-DNV9 IS90B-DNV9XShown Actual Size Remove the Bubble Removing the BubbleSurface Installation CEILING/WALL InstallationUnshielded Twisted Pair UTP Video Ceiling/ Wall Installation IN-CEILING Installation Suspended Ceiling Removing the Surface Mount Ring from the Back BoxCeiling Tile Installation with Surface Mount Ring IN-CEILING Installation Fixed CEILING/WALL Surface Installation 4S Standard Electrical BOX In-Ceiling Installation to a Fixed Ceiling/WallIN-CEILING Installation 4S Deep Electrical BOX Standard Electrical Box InstallationDeep Electrical Box Installation Camera Adjustments Varifocal Lens Zoom and Focus AdjustmentsAdjusting the Focus DN/CH/C Series Adjustments Switch SettingsAuto Iris Level Adjustment Blemish Detection DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-2 Line SyncSW1-4 Auto White Balance/Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Liner and Bubble Installing the BubbleService Connector Service ConnectorAttaching the 2.5 mm Monaural Headphone Plug Specifications GeneralCAMERA/LENS Revision History Product Warranty and Return Information