JAI TS(C)-2076EN Updating the Fpga Bitfile, Updating the Lib/Drv File, Updating the OS Image

Page 32

EN Camera Series

EN Camera Series Progressive Scan Shutter Cameras

1.Start the EN setup software.

2.Click the “Properties” button.

3.Right-click on the camera, and select “Update Firmware.”

4.Select “Update EN Application.”

5.Reboot the EN camera for the updates to take effect. Note: You cannot update the identical EN application version.

4.3Updating the FPGA Bitfile

You can update the FPGA bitfile by using the EN setup software. To do so, follow the steps below.

1.Start the EN setup software.

2.Click the “Properties” button.

3.Right-click on the camera, and select “Update Firmware.”

4.Select “Update FPGA Bit-file.”

5.Reboot the EN camera.

4.4Updating the Lib/Drv File

You can update the Lib/Drive file by using the EN setup software. To do so, follow the steps below.

1.Start the EN setup software.

2.Click the “Properties” button.

3.Right-click on the camera and select “Update Firmware.”

4.Select “Update Library/Driver.”

5.Reboot the EN camera.

4.5Updating the OS Image

You can update the OS image by using the EN setup software. To do so, follow the steps below.

1.Start the EN setup software.

2.Click the “Properties” button.

3.Right-click on the camera and select “Update Firmware.”

4.Select “Update OS Image.”

5.Reboot the EN camera.

4.6Updating the Camera’s H8 Firmware

You can update the camera’s firmware using the EN setup software. To do so, follow the steps below.

1.Start the EN setup software.

2.Click the “Properties” button.

3.Right-click on the camera, and select “Update Firmware.”

4.Select “Update H8.”

5.Reboot the EN camera for the changes to take effect.

 

 

 

32

Uploading Firmware

Page 31 Page 33
Image 32
Page 31 Page 33
Contents EN Camera Series Page Warranty DisclaimerCertifications EN Camera SeriesMailtrafficsales.americas@jai.com Trafficsales.emea@jai.com Table of Contents OP-IR OP-RED List of Figures List of Figures ViiEN Camera Series Viii List of Figures List of Tables List of TablesEN Camera Series List of Tables Introduction Scope of this ManualRelated Documents Key Functions of the EN CameraEN Camera Series Product Description Network Settings Getting StartedRequired Equipment Getting StartedInstalling the Required Software Start Up the EN Setup Software TutorialImage Capturing TutorialCamera Properties Live Image Capturing/Focusing Live Image Capturing Measuring Box Position Quad Size Image Button Image Properties EN Camera Series Image Transfer ADR Automatic Dynamic Range ControlFTP Image Transfer Light Sensor ConnectionEN Camera Series Flash Nighttime Light Control EN Camera Series Time Synchronization Static IP Address AssignmentDhcp Client EN Camera Series Maintenance Debug CountersFirmware Upgrade Firmware Names and Descriptions3 RS-232 PowerPC Debug Port EN Camera Series EN Camera Series Uploading the Firmware To Verify Version Numbers for all FirmwareUpdating the EN Application Software Uploading FirmwareUpdating the Fpga Bitfile Updating the Lib/Drv FileUpdating the OS Image Updating the Camera’s H8 FirmwareUploading Firmware Connectors and Cables Connector Pin ConfigurationsConnectors and Cables 1 12-Pin Connector10/100 BaseT Ethernet Pinout Configuration Power Supplies and Power Cable Setup Power SuppliesJAI Inc. Power Cables EN Camera Series RS-232 Communication CableBuilding Your Own Power Cable Attaching the Power Cable to the ConnectorAttaching the Camera Lens Lens Mount FormatCamera Features Asynchronous ResetCamera Features Progressive ScanningTiming Chart 1 TSC-2030EN Timing Chart 2 TSC-1327EN Timing Chart 3 TSC-4032EN EN Camera Series ADR Automatic Dynamic Range Control Camera ADR Control Related RegistersElectronic Shutter Factory Default Settings of the ADR Shutter Min. and Max EN Exposure TimesGain Table Color EN Camera Video Amplifier Gain ControlGain Table BW EN Camera HDR Mode 4032EN Only Flash/Nighttime Light Control External Control Color Filter Array Color Version1 RS-485 EthernetImage Formats TIF FormatTCP Message-Based Image Transfer on the Control Channel UDP Image Transfer on Setup ChannelJpeg Format 10 FTP Factory Default Storage Setup of Image BufferingImage Buffering EN Camera Series NTP Network Time Protocol Frequently Asked Questions and Troubleshooting FAQ and TroubleshootingFAQ and Troubleshooting Problem 11 Light Sensor Connection is Not reliable Problem 12 IO Board Communication ErrorInformation and Support Resources Problem 15 FlashErorr Appears in the Error RegisterProblem 16 Timestamp is Not Set to Current Local Time Appendix SpecificationsEN Camera Series Product Specifications Tables Processor Module Model TS-4032EN/TSC-4032EN Physical Dimensions TSC-2030EN/TSC-2076EN/TSC-1327EN Physical Dimensions TSC-4032ENSpectral Response B/W CCD Spectral Response B/W CCD TS-1327ENSpectral Response B/W Cmos TS-4032EN Spectral Response Color CCD TSC-1327EN IR Cut Filter Response for monochrome cameras Color filter spectrum response of TSC-1327EN Configurable Order Options for EN Cameras OP-IROP-RED OptionsPage Europe, Middle East & Africa

TS(C)-1327EN, TS(C)-4032EN, TS(C)-2030EN, TS(C)-2076EN specifications

The JAI TS(C) series features a range of advanced cameras designed to meet the diverse needs of industrial imaging applications. Among the models in this series, the TS(C)-2076EN, TS(C)-2030EN, TS(C)-4032EN, and TS(C)-1327EN stand out for their innovative technologies and robust characteristics.

The TS(C)-2076EN is equipped with a 20 megapixel sensor that delivers high-resolution images with exceptional clarity. Utilized primarily in high-performance machines, its compact design ensures easy integration into existing systems. The camera offers a frame rate of up to 60 frames per second, making it suitable for high-speed applications. Furthermore, the TS(C)-2076EN features a global shutter, which eliminates motion blur, ensuring accurate image capture in dynamic environments.

Next in the lineup, the TS(C)-2030EN provides a balanced blend of speed and resolution with its 12 megapixel sensor, allowing for both detailed imaging and high frame rates of up to 120 fps. This model is particularly favored in applications such as 2D and 3D inspections, where quick analysis and precision are critical. The camera’s advanced image processing capabilities enhance performance, while its robust build ensures durability in various industrial settings.

The TS(C)-4032EN has been designed for applications requiring exceptional detail, leveraging a high-resolution 41 megapixel sensor. This model offers an impressive frame rate of 30 fps, making it ideal for capturing intricate details in static subjects. Its large sensor size and advanced optics increase light sensitivity, enabling it to perform well in low-light conditions. The camera also supports advanced connectivity options, facilitating seamless integration with various imaging systems.

Lastly, the TS(C)-1327EN focuses on high-speed imaging with a 3.2 megapixel sensor that can achieve frame rates of up to 300 fps. This camera is specifically engineered for fast-moving objects, making it suitable for applications in areas such as robotics and automation. Its compact design, along with superior synchronization features, make it an excellent choice for synchronized multi-camera setups.

Collectively, the JAI TS(C) series combines high image quality, rapid frame rates, and advanced imaging technologies to deliver versatile solutions for industrial applications. Each model is crafted with precision and built to endure, ensuring they remain reliable tools for meeting modern industrial imaging demands.
Top Page Image Contents