EN Camera Series RS-232 Communication Cable

EN Camera Series

5.2RS-232 Communication Cable

Figure 13. Serial Communications Cable RS-232B-12 (JAI Inc. part number: 310 132 19)

The RS-232B-12 interface cable is used to debug the PowerPC processor. This debug port is useful when the network is down and RS-232 is the only choice to connect with the EN camera. See Section

3.6.3on page 24 and Section 4.7 on page 31 for detailed information on how to use the debug PowerPC port.

Note: Please make sure not to “hot” plug this cable into the camera (i.e. Plugging in while camera is on), unless your laptop or desktop PC is properly grounded. A PC with a floating ground can damage the internal circuit of the EN camera or your PC’s serial port as soon as the debug (RS-232B-12) cable is connected.

5.3Power Supplies and Power Cable Setup

5.3.1Power Supplies

The EN Camera requires 12V DC power that is obtained through the 12-pin connector located on the rear panel of the camera. PULNiX recommends the following power supplies:

PD-12UU	100-240V AC/12V DC	1.2A universal voltage power supply with US Plug
PD-12UUP	100-240 V AC	1.2A universal voltage power supply, with US Plug and
		12-pin connector
PD-12UE	100-240V AC/12V DC	1.2A universal power supply with European Plug
PD-12UEP	100-240V AC/12V DC	1.2A universal power supply with European Plug and
		12-pin connector

If you are providing power through the 12-pin connector, the PD-12UUP and PD-12UEP power supplies are available with the 12-pin mating connector already attached to the leads from the power supply. The PD-12UU and PD-12UE power supply can be connected to the JAI Inc. power cable using a terminal strip or directly.

When wiring the PD-12UU and PD-12UE power supplies directly, please note the following:

•The lead ends must be twisted together and tin-soldered for strength and electrical continuity.

•Shrink tubing or a similar insulator should be used to prevent exposed leads from touching and shorting.

•The +12V lead is marked with a red stripe or white lettering; be sure not to reverse the leads.

•All connections must be properly insulated to prevent shorting.

5.3.2JAI Inc. Power Cables

If you are using JAI Inc. power cables such as the 12P-02S, please refer to the 12-pin connector pin- out diagram. The cable pin-out diagram is shown in Figure 14 below. The color-coded leads use Gray for Ground and Yellow for +12V.


36		Connectors and Cables

TS(C)-1327EN, TS(C)-4032EN, TS(C)-2030EN, TS(C)-2076EN specifications

The JAI TS(C) series features a range of advanced cameras designed to meet the diverse needs of industrial imaging applications. Among the models in this series, the TS(C)-2076EN, TS(C)-2030EN, TS(C)-4032EN, and TS(C)-1327EN stand out for their innovative technologies and robust characteristics.

The TS(C)-2076EN is equipped with a 20 megapixel sensor that delivers high-resolution images with exceptional clarity. Utilized primarily in high-performance machines, its compact design ensures easy integration into existing systems. The camera offers a frame rate of up to 60 frames per second, making it suitable for high-speed applications. Furthermore, the TS(C)-2076EN features a global shutter, which eliminates motion blur, ensuring accurate image capture in dynamic environments.

Next in the lineup, the TS(C)-2030EN provides a balanced blend of speed and resolution with its 12 megapixel sensor, allowing for both detailed imaging and high frame rates of up to 120 fps. This model is particularly favored in applications such as 2D and 3D inspections, where quick analysis and precision are critical. The camera’s advanced image processing capabilities enhance performance, while its robust build ensures durability in various industrial settings.

The TS(C)-4032EN has been designed for applications requiring exceptional detail, leveraging a high-resolution 41 megapixel sensor. This model offers an impressive frame rate of 30 fps, making it ideal for capturing intricate details in static subjects. Its large sensor size and advanced optics increase light sensitivity, enabling it to perform well in low-light conditions. The camera also supports advanced connectivity options, facilitating seamless integration with various imaging systems.

Lastly, the TS(C)-1327EN focuses on high-speed imaging with a 3.2 megapixel sensor that can achieve frame rates of up to 300 fps. This camera is specifically engineered for fast-moving objects, making it suitable for applications in areas such as robotics and automation. Its compact design, along with superior synchronization features, make it an excellent choice for synchronized multi-camera setups.

Collectively, the JAI TS(C) series combines high image quality, rapid frame rates, and advanced imaging technologies to deliver versatile solutions for industrial applications. Each model is crafted with precision and built to endure, ensuring they remain reliable tools for meeting modern industrial imaging demands.