JAI TS(C)-2076EN, TS(C)-1327EN, TS(C)-2030EN Problem 15 FlashErorr Appears in the Error Register

Page 56

EN Camera Series

7.13Problem 13: Night Time Image is Too Bright and License Plate is Whited Out or Saturated

1.Make sure that the light sensor is connected to the EN camera (Set ADR register to Auto).

2.Add ADR A offset to reduce the gain at night time. ADR offset is used only when the night light is turned on. When ADR A offset is high, the EN camera reduces the system gain and the brightness of the license plate is reduced. Add only to ADR A offset.

7.14Problem 14: The Day Time Image is too Bright and Whites Out or Saturates the License Plate

1.Make sure that the light sensor is connected to the EN camera by setting the ADR register to Auto.

2.Add the ADR A side gain to reduce the gain at daytime. If B side is facing toward the same direction as the license plate, apply the ADR B side gain, instead.

3.The factory default setting is 1.00, but it can be changed up to 1.35 to reduce the camera's system gain. The ADR A and B side gain are used only when the night light is turned off (only in daytime).

7.15Problem 15: Flash_Erorr Appears in the Error Register

1.If you use an AC Flash Unit, enter 1 in the config register (address = 42 decimal) so that the flash status is "Normally High. Goes Low at alarm."

2.If you use DC Flash Unit, enter 2 to config register (address = 42 decimal) so that flash status is "Normally Low. Goes High at alarm."

3.After changing the register, save the setting to FlashROM.

7.16Problem 16: Timestamp is Not Set to Current Local Time

1.Use the EN setup software to set local time. In the “Property” window, find the “Real Time Clock” register. If NTP is OFF, then the displayed time is estimated to drift about 1.5 second per day.

2.If NTP is ON, then the time is automatically synchronized with the NTP server. However, the timestamp inside the TIF/JPEG header is UTC in GMT time zone. The viewer’s software will need to decode the UTC (GMT time zone) to sync appropriately with local time.

7.17Information and Support Resources

For further information and support:

Phone: (408) 383-0300 (Request ITS technical support when the telephone call is answered.)

Toll-free: (800) 445-5444

Fax: (408) 383-0301

E-mail Americas: solutionssupport.americas@jai.com

E-mail Europe, Middle East, or Africa: solutionssupport.emea@jai.com

Mail: JAI Inc.

ATTN: Traffic Solutions

625 River Oaks Parkway San Jose, CA 95134

Web Site: www.jai.com

 

 

 

56

FAQ and Troubleshooting

Page 55 Page 57
Image 56
Page 55 Page 57
Contents EN Camera Series Page Warranty DisclaimerCertifications EN Camera SeriesMailtrafficsales.americas@jai.com Trafficsales.emea@jai.com Table of Contents OP-IR OP-RED List of Figures List of Figures ViiEN Camera Series Viii List of Figures List of Tables List of TablesEN Camera Series List of Tables Introduction Scope of this ManualRelated Documents Key Functions of the EN CameraEN Camera Series Product Description Network Settings Getting StartedRequired Equipment Getting StartedInstalling the Required Software Start Up the EN Setup Software TutorialImage Capturing TutorialCamera Properties Live Image Capturing/Focusing Live Image Capturing Measuring Box Position Quad Size Image Button Image Properties EN Camera Series Image Transfer ADR Automatic Dynamic Range ControlFTP Image Transfer Light Sensor ConnectionEN Camera Series Flash Nighttime Light Control EN Camera Series Time Synchronization Static IP Address AssignmentDhcp Client EN Camera Series Maintenance Debug CountersFirmware Upgrade Firmware Names and Descriptions3 RS-232 PowerPC Debug Port EN Camera Series EN Camera Series Uploading the Firmware To Verify Version Numbers for all FirmwareUpdating the EN Application Software Uploading FirmwareUpdating the Fpga Bitfile Updating the Lib/Drv FileUpdating the OS Image Updating the Camera’s H8 FirmwareUploading Firmware Connectors and Cables Connector Pin ConfigurationsConnectors and Cables 1 12-Pin Connector10/100 BaseT Ethernet Pinout Configuration Power Supplies and Power Cable Setup Power SuppliesJAI Inc. Power Cables EN Camera Series RS-232 Communication CableBuilding Your Own Power Cable Attaching the Power Cable to the ConnectorAttaching the Camera Lens Lens Mount FormatCamera Features Asynchronous ResetCamera Features Progressive ScanningTiming Chart 1 TSC-2030EN Timing Chart 2 TSC-1327EN Timing Chart 3 TSC-4032EN EN Camera Series ADR Automatic Dynamic Range Control Camera ADR Control Related RegistersElectronic Shutter Factory Default Settings of the ADR Shutter Min. and Max EN Exposure TimesGain Table Color EN Camera Video Amplifier Gain ControlGain Table BW EN Camera HDR Mode 4032EN Only Flash/Nighttime Light Control External Control Color Filter Array Color Version1 RS-485 EthernetImage Formats TIF FormatTCP Message-Based Image Transfer on the Control Channel UDP Image Transfer on Setup ChannelJpeg Format 10 FTP Factory Default Storage Setup of Image BufferingImage Buffering EN Camera Series NTP Network Time Protocol Frequently Asked Questions and Troubleshooting FAQ and TroubleshootingFAQ and Troubleshooting Problem 11 Light Sensor Connection is Not reliable Problem 12 IO Board Communication ErrorInformation and Support Resources Problem 15 FlashErorr Appears in the Error RegisterProblem 16 Timestamp is Not Set to Current Local Time Appendix SpecificationsEN Camera Series Product Specifications Tables Processor Module Model TS-4032EN/TSC-4032EN Physical Dimensions TSC-2030EN/TSC-2076EN/TSC-1327EN Physical Dimensions TSC-4032ENSpectral Response B/W CCD Spectral Response B/W CCD TS-1327ENSpectral Response B/W Cmos TS-4032EN Spectral Response Color CCD TSC-1327EN IR Cut Filter Response for monochrome cameras Color filter spectrum response of TSC-1327EN Configurable Order Options for EN Cameras OP-IROP-RED OptionsPage Europe, Middle East & Africa

TS(C)-1327EN, TS(C)-4032EN, TS(C)-2030EN, TS(C)-2076EN specifications

The JAI TS(C) series features a range of advanced cameras designed to meet the diverse needs of industrial imaging applications. Among the models in this series, the TS(C)-2076EN, TS(C)-2030EN, TS(C)-4032EN, and TS(C)-1327EN stand out for their innovative technologies and robust characteristics.

The TS(C)-2076EN is equipped with a 20 megapixel sensor that delivers high-resolution images with exceptional clarity. Utilized primarily in high-performance machines, its compact design ensures easy integration into existing systems. The camera offers a frame rate of up to 60 frames per second, making it suitable for high-speed applications. Furthermore, the TS(C)-2076EN features a global shutter, which eliminates motion blur, ensuring accurate image capture in dynamic environments.

Next in the lineup, the TS(C)-2030EN provides a balanced blend of speed and resolution with its 12 megapixel sensor, allowing for both detailed imaging and high frame rates of up to 120 fps. This model is particularly favored in applications such as 2D and 3D inspections, where quick analysis and precision are critical. The camera’s advanced image processing capabilities enhance performance, while its robust build ensures durability in various industrial settings.

The TS(C)-4032EN has been designed for applications requiring exceptional detail, leveraging a high-resolution 41 megapixel sensor. This model offers an impressive frame rate of 30 fps, making it ideal for capturing intricate details in static subjects. Its large sensor size and advanced optics increase light sensitivity, enabling it to perform well in low-light conditions. The camera also supports advanced connectivity options, facilitating seamless integration with various imaging systems.

Lastly, the TS(C)-1327EN focuses on high-speed imaging with a 3.2 megapixel sensor that can achieve frame rates of up to 300 fps. This camera is specifically engineered for fast-moving objects, making it suitable for applications in areas such as robotics and automation. Its compact design, along with superior synchronization features, make it an excellent choice for synchronized multi-camera setups.

Collectively, the JAI TS(C) series combines high image quality, rapid frame rates, and advanced imaging technologies to deliver versatile solutions for industrial applications. Each model is crafted with precision and built to endure, ensuring they remain reliable tools for meeting modern industrial imaging demands.
Top Page Image Contents