Honeywell HCC334L Synchronization Selection LL/INT, Auto White Balance Control AWC, One Push Lock

Auto White Balance Control (AWC)

This mode covers a wider range of 2000°K to 10000°K and performs at a faster operating speed than ATW mode. This mode is typically used for outdoor applications or where variable lighting conditions exist.

One Push Lock

Press PUSH LOCK on the rear of the camera to calibrate the white balance for the current scene. This mode is typically used for scenes with constant lighting conditions.

Synchronization Selection (LL/INT)

This switch selects the synchronization mode of the camera. When the camera is connected to an AC supply, the Line lock (LL) mode is used to lock the camera’s frame rate to the frequency so that each camera in the system is triggered at the same point on the supply’s AC cycle. The default setting is LL.

WARNING! The LL/INT switch must be set to INT when operating from 12 VDC.

V-PH

				VIDEO
PUSH		IRIS
LOCK	LEVEL		V-PH
		PWR			L/L
			EE	ME
			AES	AI
				BLC	INT
				FL	VSD
			OFF	AGC
				WB3
	+	-		WB2	DC
AC 24V			GND	WB1
DC 12V

L/L

INT

Rev 3 7 G-113077-002

01/07