JAI CV-M532 operation manual Main Features

Page 5

CV-M532

3. Main Features

•Miniature-sized remote head - ø12mm (0.47")

•1/3" Hyper HAD interline transfer CCD imager, 768(H) x 494(V) for EIA and 752(H) x 582(V) for CCIR

•High resolution - horizontal 570 TV lines for EIA

•Excellent S/N - better than 56dB

•High sensitivity - 0.2 lx minimum illumination on CCD imager

•Improved low smear and higher dynamic range

•Edge pre-select and pulse width external trigger modes

•High speed and random trigger shutter up to 1/10,000 sec.

• Long-time exposure mode - 1/30 sec. ~∞ (EIA)

•WEN and EEN output (pixel clock output : user option) - to support further advanced image capturing

•Internal, external HD/VD synchronization

•Easy access for mode-setting of shutter and other function from rear panel

•Lens mount - Special mount type

•Durable camera cable for industrial environment - available from 2m (6.56 feet)

- 4 -

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CV-M532 Declaration of Conformity Table of Contents Standard Composition GeneralMain Features Locations and Functions Type HR10A-7R-6PB Hirose male Seen from rear Pin Multi-connector DC-IN/SYNCPin Assignment Normal Shutter Mode Input/Output of HD/VD SignalExternal Trigger Mode Functions and OperationsEdge pre-select mode for non-interlace only EIA Non-interlaced / Field accumulation modePulse Width Control Mode Pulse width control mode for non-interlace only Start/Stop Trigger Mode CV-M532 EIA Long Time Exposure ModeCV-M532 Table for Shutter Time Mode SettingTable for SW 1 Setting SW2 on PK8057 Board Pixel Clock Output Jumper SettingsBoard PK8057 Side a Location of SW2 and JumpersBoard PK8054 Side B VR4 VR3 VR5 Adjustment of Video Signal Output LevelHead External AppearanceCCU Spectral Sensitivity SpecificationsAppendix PrecautionsTypical CCD Characteristics User’s Record Users Mode Settings Users ModificationsCamera type CV-M532 Scanning system Revision Revision E Serial No
Top Page Image Contents