JAI CV-M538, CV-M536, CV-M539 operation manual Main Features

Page 5

CV-M536/538/539

3. Main Features

Miniature-sized remote head - ø17mm (0.67")

1/2" Hyper HAD interline transfer CCD imager, 768(H) x 494(V) for EIA and 752(H) x 582(V) for CCIR

High resolution - horizontal 570 TV lines for EIA, 560 TV lines for CCIR

Excellent S/N - better than 56dB

High sensitivity - 0.05 lx minimum illumination on CCD imager

Improved low smear and higher dynamic range

Edge pre-select and pulse width external trigger modes

High speed and random trigger shutter up to 1/10,000 sec.

Long-time exposure mode - 1/30 sec. ~(EIA)

-1/25 sec. ~(CCIR)

WEN and EEN output (pixel clock output : user option) - to support further advanced image capturing

Internal, external HD/VD synchronization

Easy access for mode-setting of shutter and other function from rear panel

Lens mount - Special mount type

Durable camera cable for industrial environment - available from 2m (6.56 feet) up to 10m (32.8 feet)

- 4 -

Image 5
Contents CV-M536/538/539 Declaration of Conformity Table of Contents Standard Composition GeneralMain Features Locations and Functions Pin Assignment Pin Multi-connector DC-IN/SYNCPin Multi-connector Trigger Functions and Operations Input/Output of HD/VD SignalEdge pre-select mode for non-interlace only EIA Non-interlaced / Field accumulation modePulse Width Control Mode Ccir Non-interlaced / Field accumulation modePulse width control mode for non-interlace only Start/Stop Trigger Mode CV-M536/538/539 EIA Ccir Long Time Exposure ModeCV-M536/538/539 Table for Shutter Time Mode SettingTable for SW 1 Setting SW2 on PK8057 Board Pixel Clock Output Jumper SettingsBoard PK8057 Side a Location of SW2 and JumpersBoard PK8054 Side B Adjustment of Video Signal Output Level Head External AppearanceCCU Spectral Sensitivity SpecificationsAppendix PrecautionsTypical CCD Characteristics User’s Record Users Mode Settings Users ModificationsCamera type CV-M536/538/539 Scanning system Revision Revision E Serial No