Motion Action Setup (1) | ENGLISH |
|
<Figure 18 > Motion Action Setup (1) screen.
This screen allows you to set up the actions the multiplexer will take when there is a motion alarm condition.
•Buzzer : When set to On, the multiplexer’s internal buzzer will sound during a motion alarm condition.
•Alarm Screen : When set to On, the screen display will change to the one defined in the Alarm Screen Format menu during a motion alarm condition.
•Network Relay : When set to On, the multiplexer sends the alarm information to an external relay box via the network during a motion alarm condition.
•Message Latch : When set to On, an “M” displays on the screen when a motion alarm condition occurs. It remains on the screen until it is cleared.
23