Honeywell HXMT9 / HXMT9X Alarms and Other Connections, Initial Setup, Accessing the Main Menu

Alarms and Other Connections

The 50-pin ALARM IN/OUT connector has 9 alarm inputs, 9 alarm outputs, RS-232 connectors, VCR trigger pulse and various alarm settings. See Appendix B — Connector Pin Outs for further details on how to make these connections.

Initial Setup

Setting up for EIA or CCIR Operation

NOTE : When changing the multiplexer to EIA or CCIR all other settings
are returned to the factory defaults.
The multiplexer can be used with either EIA or CCIR systems.
To set it up for EIA operation:
1)	Turn off the power	and {M} buttons.
2)	Press and hold the
3)	Turn on the power
To set up the multiplexer for CCIR operation:
1)	Turn off the power
2)	Press and hold the	and	buttons.
3)	Turn on the power

Accessing the Main Menu

NOTE : To access the Main Menu you must have a Supervisor Password. The last item of the Main Menu is the Password Setup. Keep the passwords you create in a safe place. The new passwords will be the only way to access certain features of the multiplexer once you have changed from the factory default passwords.

<Figure 5 > Top menu bar.

8