Motion Detection Sensor Setup (Normal)
<Figure 30 > Motion Detection Sensor Setup (Normal) screen.
The Motion Detection Sensor Setup screen is used to setup and test cameras for motion detection. Mode 1 and Mode 2 can be set up for either Normal or Vector motion detection. The following describes Normal motion detection.
•SET : Highlights the grids area.
Click of the mouse on this icon has no action.
•Dot/Line/All : Determines how many targets will be turned on or off. Dot = single target. Line = a row of targets. All = all the targets.
•Reverse : Set all targets to the reverse side.
•Test : Goes to the Motion Detection Sensor Setup test screen.
•Exit : Saves your changes and returns to the previous menu.
38