Panasonic HCV550K owner manual Endless Loop Recording, Select sound in loop recording setting

Endless Loop Recording

≥Insert an SD card.

≥Change the Recording Mode to . (l 43)

1Select sound in loop recording setting.

[ON]: Records sound.

[OFF]: Recording of sound is off.

2Start recording.

≥Once you start recording, the scene will be automatically divided every 2 minutes. The divided scenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to 30 scenes will be saved.)

≥When the period between the time you start recording and the time you stop recording is longer than 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recording will be saved. The part before the 1 hour part will be deleted.

≥Recording stops automatically when approximately 24 hours have passed since the start of the recording.

≥During recording, the blinks.

≥The remaining recordable time and elapsed recording time are not displayed. (l 22)

≥Only when sound in loop recording is set to [ON], (microphone input level meter) is displayed.

To switch sound in loop recording

The menu can be set to switch to sound in loop recording.

MENU : [RECORD SETUP] # [Sound In Loop Recording] # [ON] or [OFF]

≥Still pictures cannot be taken.

≥[REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720].

≥HC-V550

Image Stabilizer Function is set to (setting canceled) and Level Shot Function is set to off.

HC-V250

Image Stabilizer Function is set to (setting canceled).

≥Endless Loop Recording is not possible in the following cases: jWhen the SD card is not inserted

jWhen the approximate remaining recordable time on the SD card is less than 1 hour (The time between R 0h00m and R 0h59m flashes red.)

≥Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient to play back loop-recorded scenes by date. (l 82)

(The date displayed on the date list will be the one on which you started Endless Loop Recording.)

- 52 -