Panasonic HCV550K owner manual 189

	With other products
Problem	Check points
Cannot copy scenes on	≥ Other equipment might have not recognized the SD card.
the SD card by connecting	Unplug the USB cable once, and reconnect it.
to other equipment with
the USB cable.

	With a PC
Problem	Check points
When connected by the	≥ After re-inserting the SD card into the unit, reconnect the
USB cable, this unit is not	supplied USB cable.
detected by the PC.	≥ Select another USB terminal on the PC.
	≥ Check the operating environment. (l 172, 180)
	≥ Connect the supplied USB cable again after restarting the PC
	and turning on this unit again.
When the USB cable is	≥ To disconnect the USB cable safely, double-click the
disconnected, an error	icon in the task tray and follow the instructions on the screen.
message will appear on
the PC.
Cannot see the PDF	≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe
operating instructions for	Reader 7.0 or later to read the PDF operating instructions for
HD Writer LE 2.1.	HD Writer LE 2.1.

	About the Wi-Fi function
Problem	Check points
Cannot connect to	≥ Read page 160 if the Wi-Fi connection cannot be established.
wireless access point or
smartphone.
Cannot operate from	≥ Install the smartphone app “Image App” on your smartphone.
smartphone using [Link to	(l 150)
Cell].
When I look at the	≥ If you set [REC MODE] to AVCHD [1080/60p] or MP4/iFrame
recording screen with the	[1080] in Motion Picture Recording Mode, mosaic-like noise
smartphone, mosaic-like	may appear on the screen and the image movement may not
noise appears on the	look smooth. (These will not affect the recorded image.)
screen and the image
movement does not look
smooth.
Cannot use [DLNA Play].	≥ Make sure the television is compatible with DLNA. Read the
	instructions for the television you are using.
	≥ Make sure the wireless access point and this device are
	properly connected.
	≥ Approach the wireless access point and reconnect.
	≥ If a connection cannot be made between this device and a
	DLNA-compatible device, try to reconnect and make sure
	they connect properly.

- 189 -