Panasonic HCV550K owner manual Device Name, IP Address/DNS Settings, Connection Test, 164

[Device Name]

You can view and change this unit’s Device name (SSID), which is used for operating this unit as a wireless access point.

1Touch [INPUT], and enter the desired Device name (SSID).

≥Input up to 20 characters are recommended. All the characters cannot be confirmed when displaying the Device names on this unit if a long Device name is used. (l 157)

≥For details on how to enter characters, refer to page 87.

2Touch [EXIT].

≥If you are going to connect directly to a smartphone after changing the Device name (SSID), set the connection again with the changed Device name (SSID). (l 157)

≥The Password entered during the setting of direct connection cannot be changed. (l 157)

[IP Address/DNS

Settings]

You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet Mask] and [MAC Address].

[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]

≥If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL], you can set each item. Select the item you want to set, and set it.

≥[MAC Address] cannot be changed.

[Connection Test]

You can test the connection between this unit and the wireless access point. The following connections can be verified:

jConnection to the wireless access point

jConnection to “LUMIX CLUB”

jConnection to USTREAM

jConnection to the home monitor server

1 Touch [NEXT].

≥The connection test starts.

2Check the connection test result, and touch [EXIT].

≥If the connection is successful, “±” is displayed. If the connection is not successful, “t” is displayed.

≥To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings in advance. (l 145, 165)

- 164 -