Panasonic HCV550K Using Home Cam, Connecting with Android non-NFC-compatible or iOS device, 133

Start home monitoring.

Start up the smartphone application “Image App”.

Using [Home Cam]

≥Perform the home monitoring operation on the smartphone. (l 136)

≥When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the network settings.

When using the home monitor function for the first time

∫If the device is Android (NFC-compatible)

≥Set the NFC function of the smartphone to ON.

1 Turn off the Wi-Fi setting of the smartphone.

2

≥When a Wi-Fi connection guidance screen is displayed, select [NO].

3 Enable the home monitoring setting from the menu of the smartphone application “Image App”.

≥Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home Monitor].

4 Select [Set connect. dest.] of the smartphone.

5 Touch the smartphone on of this unit.

≥If this is the first time the smartphone is connecting to this unit,

touch [YES] on the screen of this unit, and then touch the

smartphone on of this unit again.

≥ If the unit is not recognized even when touching the smartphone, change positions and try again.

≥ Check that the message “Connecting...” has disappeared from this unit.

6 When [Start “Home Cam”?] is displayed on the smartphone, select [YES].

7

∫Connecting with Android (non-NFC-compatible) or iOS device

1 Press Wi-Fi button and touch [Home Cam]. 2 Turn off the Wi-Fi setting of the smartphone.

3 Start up the smartphone application “Image App”.

≥(If the device is Android)

When a Wi-Fi connection guidance screen is displayed, select [No].

≥(If the device is iOS)

If a confirmation message for the Wi-Fi setup is displayed, select [Close].

4 Enable the home monitoring setting from the menu of the smartphone application “Image App”.

≥Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home Monitor].

5 Select [Set connect. dest.] of the smartphone.

- 133 -