Panasonic HCV550K Setting up a direct connection to a smartphone, Connecting with QR code, 157

On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit.

Setting up a direct connection to a smartphone

Check if the smartphone you are using is compatible with WPS

≥For US customers enter SSID and Password or scan QR code to connect. jIf the smartphone is compatible with WPS:

Proceed to the following [WPS Connection] jIf the smartphone is not compatible with WPS:

Proceed to the following “Connecting with QR code”

[WPS Connection]

1 Press Wi-Fi button and touch [Wi-Fi Setup]. 2 Touch [Direct Connection].

3 Touch [Change connection type].

4 Touch [WPS Connection].

5 Set the smartphone to WPS Mode.

Confirming that the Wi-Fi connection is complete

jThe status indicator of this unit is lit green

j is displayed on the screen

Connecting with QR code

1 Press Wi-Fi button and touch [Wi-Fi Setup]. 2 Touch [Direct Connection].

3 Touch [Change connection type].

4 Touch [QR code].

≥QR code is displayed on the screen of this unit.

5 Start up the smartphone application “Image App”.

6

≥When using an Android device, the smartphone and this unit are connected directly, allowing you to use remote operations. (l 125)

≥When using an iOS device, perform the following operations:

1Select the option that allows you to install the app on the profile screen of the “Image App”, and

follow the on-screen instructions to complete the installation.

2Press the home button to close the displayed screen.

3Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.

≥When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”. (l 158)

Confirming that the Wi-Fi connection is complete

jThe status indicator of this unit is lit green

j is displayed on the screen

- 157 -