Panasonic HCV550K Quick Start, Alert Sound, Close the LCD monitor, Open the LCD monitor

[QUICK START]

This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.

≥When in Quick Start Standby Mode about 50% of the power used in recording pause mode is being consumed, so the recording time will be reduced.

≥Quick Start will not work if there is no SD card inserted.

1Select the menu.

MENU : [SETUP] # [QUICK START] # [ON]

2Close the LCD monitor.

The status indicator A flashes green and the unit goes into Quick Start Standby Mode.

≥HC-V550

The lens cover does not close.

3Open the LCD monitor.

The status indicator A lights red and the unit is put into recording pause.





≥About 5 minutes have passed, the Quick Start Standby Mode is canceled, and the unit is turned off.

≥Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds.

≥It may take some time for Automatic White Balance to adjust.

≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.

≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 33)/[ECONOMY (AC)] (l 33), close the LCD monitor once and open it again.

≥Turn the unit off using the power button.

[ALERT SOUND]

Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound.

When [OFF] is selected, the sound is not output at the start/end of recording, etc.

MENU : [SETUP] # [ALERT SOUND] # desired setting

(Volume low)/ (Volume high)/[OFF]

2 Beeps for 4 times

When an error occurs. Check the sentence displayed on the screen. (l 184)

- 34 -