Panasonic HCV550K Stop Motion Animation Assist HC-V550, Creating a new recording group

Stop Motion Animation Assist [HC-V550]

Before recording in Stop Motion Animation Assist Mode

You can create a slideshow that appears to be moving by recording the subject while moved a little at a time.

≥Each recording group can store up to 999 still pictures recorded in Stop Motion Animation Assist Mode.

≥Change the Recording Mode to . (l 43)

1Press the button to record the still pictures. (l 24)

2Touch [Enter].

≥A still picture will be recorded, and it will be displayed in a semi-transparent state on the recording screen. Look at the picture to estimate how far you should move the subject for the next recording.

≥If you have already recorded still pictures in the recording group, the last still picture will be displayed in a semi-transparent state on the recording screen.

≥ To record again, touch and record again.

3Move the subject and determine the composition of the picture.

≥ Repeat Steps 1-3 to continue recording.

≥ You can save still pictures in the same recording group until you use [Create Stop Motion].

Creating a new recording group

MENU : [PICTURE] # [Create Stop Motion]

≥If you touch [YES], a new recording group will be created and the recording screen will be displayed.

≥Once you create a recording group, you cannot save still pictures in any of the older recording groups.

≥[PICTURE SIZE] is set to 2.1M (1920k1080).

≥When you want to record still pictures in a separate recording group, use a different SD card.

≥For details on playback of the Stop Motion Animation Assist Mode, refer to page 95.

- 53 -