VCR System Setup
ENGLISH
<Figure 33 > VCR System Setup screen.
The VCR System Setup screen is used to synchronize the multiplexer with your VCR.
NOTE : If your VCR has a synchronizing trigger pulse, using it will save you a lot of time when setting up your system.
•VCR Input : There is the BNC for multiplexer input from the VCR.
•External Trigger : Set to Off if you are not using the VCR’s synchronizing trigger pulse. When using your VCR’s synchronizing trigger pulse, set to match the VCR’s signal; + for positive edge sensing and – for negative edge sensing.
•Panic Rec Buzzer : When On, the buzzer will beep every 20 seconds.
•VCR Type : Selecting this brings up a list of VCRs. Select your VCR from the list. If your VCR is not on the list select User Define.
41