EverFocus EAN850A user manual

Page 22

EAN850A

Send Test Mail: Press button to send a testing mail to the assigned address.

Set FTP

The settings relating to the FTP server used to transmit the alarm images can be configured.

FTP Server: Enter the IP address or the host name of the FTP server.

FTP Port: Enter the port number for FTP server. Default is 21.

Recording Path: Assign the recording path.

User Name: Set FTP User’s name.

Password: Set FTP password.

PASV mode: Check to enable Passive mode, normally enable Passive mode. When failed to establish the connection, uncheck "PASV" mode.

Test FTP Server: Press button to send a testing file to the assigned FTP server.

Press Apply to apply the setting changes or Reset to reset without saving the change.

22

Image 22
Contents EAN850A EAN850A Safety Notice EAN850A About this documentSupport Terms and TrademarkAbout AC Adaptor Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Setting Information2 Log User Config EAN850A Network NetworkSubnet Mask IP TypeIP address GatewayUsername PasswordEAN850A Secondary DNS Http PortDdns Bandwidth SMTP/FTP EAN850A Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EAN850A 4.4.2.1 Lens ShutterESC Reserved White Balance ControlSetup EAN850A 4.4.2.4 Backlight AGC Auto Gain ControlEAN850A 4.4.2.6 DNR Dynamic Noise Reduction SENS-UPEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A System Date/TimeEAN850A Daylight Saving SD Card Indication Description Maintenance BrowseEAN850A Specifications Local Storage Europe Office Head Office China OfficeUSA Office USA N.Y. Office