EAN850A
preceding the trigger. Input the desired length of pre-trigger buffer time. It can be set up to 120 seconds.
Post-Alarm Buffer: Image saved internally in the server from the time immediately after the trigger. Input the desired length of post-trigger buffer time. It can be set up to 120 seconds.
Press Apply to apply the setting changes or Reset to reset without saving the change.
Re-trigger Filter Setting
Re-trigger Filter: Set a re-trigger filter time, if another event is triggered during this time, this triggered event will be ignored.
Press Apply to apply the setting changes or Reset to reset without saving the change.
4.7.4 Time Mask
Time Mask Setting
Time mask setting allows you to schedule event actions.
Select Always for event action to be taken continuously.
49
