EverFocus EAN850A user manual

Page 57

EAN850A

the Load button. The settings will be restored to the previous configuration.

Upgrade Firmware

Upgrade the EAN850A with the latest firmware.

Press Browse button to search firmware file. Press Upgrade button to upgrade the firmware.

Note 1: Do not disconnect power to the unit during the upgrade. The unit reboots automatically after the upgrade has completed. (1-5 minutes.)

2. During upgrading process, all event recording actions will be stopped. It will continue to record after the camera is rebooted.

57

Image 57

Contents EAN850A EAN850A EAN850A About this document Safety NoticeTerms and Trademark SupportAbout AC Adaptor Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Information Setting2 Log User Config EAN850A Network NetworkIP address IP TypeSubnet Mask GatewayEAN850A Secondary DNS PasswordUsername Http PortDdns Bandwidth SMTP/FTP EAN850A Video Network Alarm reserved for PowerConMulti Streaming Camera SET button Shutter EAN850A 4.4.2.1 LensWhite Balance Control ESC ReservedSetup AGC Auto Gain Control EAN850A 4.4.2.4 BacklightSENS-UP EAN850A 4.4.2.6 DNR Dynamic Noise ReductionEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A Date/Time SystemEAN850A Daylight Saving SD Card Indication Description Browse MaintenanceEAN850A Specifications Local Storage USA Office Head Office China OfficeEurope Office USA N.Y. Office