EverFocus EAN850A user manual Network

Page 16

EAN850A

Note:

1.Maximum five languages can be in the language list.

2.Upload a new language file will reboot system automatically. Please reconnect IP camera after reboot.

Press Apply to apply the setting changes or Reset to reset without saving the change.

4.3 Network

The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on this page.

The "Network setup" page has 5 tabs of the [Network] tab, the [DDNS] tab, the [SMTP/FTP] tab and the [Network alarm] tab.

4.3.1 Network

The following information is required to configure the network settings. Contact the network administrator or your Internet service provider.

IP Type

IP address

16

Image 16
Contents EAN850A EAN850A Safety Notice EAN850A About this documentSupport Terms and TrademarkAbout AC Adaptor Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Setting Information2 Log User Config EAN850A Network NetworkIP Type IP addressSubnet Mask GatewayPassword EAN850A Secondary DNSUsername Http PortDdns Bandwidth SMTP/FTP EAN850A Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EAN850A 4.4.2.1 Lens ShutterESC Reserved White Balance ControlSetup EAN850A 4.4.2.4 Backlight AGC Auto Gain ControlEAN850A 4.4.2.6 DNR Dynamic Noise Reduction SENS-UPEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A System Date/TimeEAN850A Daylight Saving SD Card Indication Description Maintenance BrowseEAN850A Specifications Local Storage Head Office China Office USA OfficeEurope Office USA N.Y. Office