EverFocus EAN850A user manual Video, Network Alarm reserved for PowerCon

Page 23

EAN850A

4.3.5 Network Alarm (reserved for PowerCon)

Set Network Alarm

This function is reserved for PowerCon software, for the detail setting please refer to PowerCon network alarm protocol.

4.4 Video

The settings relating video such as streaming, camera OSD can be configured on this page.

The "Video" page has 2 tabs: the [Multi-streaming] tab and the [Camera] tab.

23

Image 23

Contents EAN850A EAN850A EAN850A About this document Safety NoticeAbout AC Adaptor Terms and TrademarkSupport Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Information Setting2 Log User Config EAN850A Network NetworkGateway IP TypeIP address Subnet MaskHttp Port PasswordEAN850A Secondary DNS UsernameDdns Bandwidth SMTP/FTP EAN850A Video Network Alarm reserved for PowerConMulti Streaming Camera SET button Shutter EAN850A 4.4.2.1 LensWhite Balance Control ESC ReservedSetup AGC Auto Gain Control EAN850A 4.4.2.4 BacklightSENS-UP EAN850A 4.4.2.6 DNR Dynamic Noise ReductionEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A Date/Time SystemEAN850A Daylight Saving SD Card Indication Description Browse MaintenanceEAN850A Specifications Local Storage USA N.Y. Office Head Office China OfficeUSA Office Europe Office