EverFocus EAN850A user manual

Page 32

EAN850A

~x128.

1.Please direct the arrow to point to “SENS UP” on the SETUP menu by using the UP and DOWN buttons.

2.Select the mode you would like to operate by pressing the LEFT or RIGHT button.

ÖAUTO: Low light level auto mode. Default value is AUTO (Up to X 10).

SETUP
LENS	DC <┘		LIMIT
SHUTTER	___	> AUTO	X 10
WHITE BAL.	ATW	> AUTO	X 10
BACKLIGHT	OFF
AGC	MIDDLE
DNR	LOW
> SENS-UP	AUTO <┘
SPECIAL <┘
EXIT

Ö OFF: The function is disabled.

3.Press SET button when you finish all the settings.

Note:

1.The maximum storage magnification in low light level movement situations can be adjusted by pressing the mini-joystick in “AUTO” mode.

2.The screen becomes brighter when the magnification increases; yet the after image increases as well.

3.Please be noted that spots and noise may appear if storage magnification increases when SENS-UP is operating. This is a normal phenomenon.

32

Image 32

Contents EAN850A EAN850A Safety Notice EAN850A About this documentAbout AC Adaptor Terms and TrademarkSupport Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Setting Information2 Log User Config EAN850A Network NetworkIP Type IP addressSubnet Mask GatewayPassword EAN850A Secondary DNSUsername Http PortDdns Bandwidth SMTP/FTP EAN850A Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EAN850A 4.4.2.1 Lens ShutterESC Reserved White Balance ControlSetup EAN850A 4.4.2.4 Backlight AGC Auto Gain ControlEAN850A 4.4.2.6 DNR Dynamic Noise Reduction SENS-UPEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A System Date/TimeEAN850A Daylight Saving SD Card Indication Description Maintenance BrowseEAN850A Specifications Local Storage Head Office China Office USA OfficeEurope Office USA N.Y. Office